User manual ALCATEL VERSATIS E100

[. . . ] 1 Phone Function Keys 1 OK key Press to select the function displayed on the handset screen directly above it. 2 Back/clear key Press to delete a digit/a character in editing mode Press to return to idle mode. Press and hold to change the handset idle display between handset name and date/time. 3 Navigation key Press UP to access the call log* and press DOWN to access the phonebook when in idle mode. [. . . ] The handset screen displays “Handset X”, where X is a number from 1 to 4. NOTE: An error tone will sound if the registration is not successful. ] to erase the digit entered. Lift the corded handset, or press [ ENTER NAME: Enter the name (max. 12 characters) and then press [ To answer a call Cordless handset When there is an incoming call, the LCD will light up. Press [ ] to answer an incoming call. NOTE: The screen shows the elapsed time as hours, minutes, seconds (hh--mm--ss) after you end the call. ENTER NUMBER: Enter the number (max. If you need a pause between digits, press and hold the until a P appears in the display. This will insert a 3-second pause in the dialing sequence. Telephone base A phonebook record on the telephone base consists only of the phone number, not the name. Enter the phone number. Only use rechargeable batteries with exactly the same specifications as those supplied with the product. Using non-rechargeable or non-conforming batteries can damage the product and could pose a health hazard (see “Technical Specifications”). Failure to comply with this recommendation will invalidate the manufacturer's warranty. Batteries can split or leak if incorrectly inserted , opened or exposed to heat. Never dispose of batteries in a fire: they could explode. Date format To change the date format: 1. ]: to select CLOCK & ALARM and then press [ ]: to select SET FORMAT and then press [ ] ]. Telephone base When there is an incoming call, the LCD will light up. Lift the corded handset, or press [ ] to answer an incoming call. 3. Press [ ]: you hear a beep confirming that the number has been 3. Press [ have been deleted. / ]: the display shows [- - - - - - - -]. 12 10 Conference callcall Conference The conference call feature allows one external call to be shared with two handsets (in intercom). To answer an incoming call during an intercom call (telephone base) Telephone Base 1. Press [ ] or lift the corded handset to answer the incoming call and end the ] to establish a conference call. Press and hold [ Cordless Handset The LCD displays “CONFERENCE” on the cordless handset. To initiate an intercom call during an outside call (telephone base) Telephone Base 1. Press [ ] during an outside call to intercom all cordless handsets. The call is placed on hold while an intercom call is established. [. . . ] ] to cancel if you do not want to save the CID number. The telephone base returns to Move nearer to the base, or move the base 1 m. Connect an approved ADSL filter between the phone connector and the wall socket. See Section 6 “Secrecy / Mute (microphone off)” of the user’s guide. [. . . ]