User manual ALCHEMIST PRODUCT 8 CD

[. . . ] If there is any need to change this then follows the relevant instructions for the plug type used. There is an external replaceable fuse on the rear of the unit: refer to specifications for fuse value. [. . . ] Repeat this procedure until the end of the sequence. You can review the whole sequence by pressing `check', each time you press will give you the next step in the sequence. In the meantime, any unwanted track can be deleted by pressing `cancel' when it is shown on the display. Finally, press `play' to start the programmed sequence. The whole program will be cancelled if `stop' is pressed in stop mode. RANDOM PLAY Press `shuffle' in stop mode, then press `play'. All of the tracks in the CD will be played randomly until all of them have been played. To cancel random play, press `shuffle' again in stop mode. INTRO PLAY Press `scan' and the Product 8 CD Player starts to play the first 10 second of each or remaining (if it is in play mode) track. Press `play' to play the tack which is playing. DESIGNED & MANUFACTURED IN HERTFORDSHIRE, ENGLAND DO NOT REMOVE ANY CHASSIS PANELS. NO USER SERVICEABLE PARTS INSIDE - REFER ALL SERVICING TO QUALIFIED PERSONNEL. CLASS 1 AUDIO PRODUCT Do not remove any panels for risk of electric shock! CLASS 1 LASER PRODUCT Peak Power Consumption: 12W MAINS FUSE: Ensure correct rating and type for voltage used!MAINS INPUT AC ONLY~ LEFT CAUTION RISK OF ELECTRIC SHOCK!DO NOT OPEN ! This unit has been factory set to operate at the voltage marked below: RIGHT 110 - 120V, 60Hz Fuse Rating: T1A 220 - 240V, 50Hz Fuse Rating: T500mA BALANCED DIGITAL OUTPUT (AES/EBU) DIGITAL OUTPUT (SPDIF) LEFT RIGHT COAXIAL AUDIO OUTPUT (AES/EBU) BALANCED AUDIO OUTPUT (AES/EBU) SOURCE CONNECTIONS As with all connections ensure that the equipment is switched off before you attempt to connect any cables. The Product 8 CD Player offers several output methods, Coaxial Audio, Balanced Audio, Coaxial Digital and Balanced Digital. If you are using the audio outputs, ensure the `Right' output is connected to the `Right' input, and `Left' output to the `Left' input of your amplifier. If you need to upgrade to another Digital to Analogue Converter, it can be done via either one of the digital outputs. [. . . ] @0dB Audio Output (Balanced): ­ 2. 3V R. M. S. @0dB Digital Output (RCA): 500mV PEAK to PEAK SPDIF Digital Balanced Output: ­ 500mV PEAK to PEAK AES/EBU Power Consumption (Peak): 12 Watts External Fuse Rating: T1A@110-120V T500mA@220-240V Dimensions ( W x H x D): 470mm x 360mm x 105mm Weight (Packed): 12Kg CLASS 1 AUDIO PRODUCT CLASS 1 LASER PRODUCT CAUTION RISK OF ELECTRIC SHOCK! [. . . ]