Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ALESIS ADAT-M20. We hope that this ALESIS ADAT-M20 user guide will be useful to you.
Lastmanuals help download the user guide ALESIS ADAT-M20.
Detailed instructions for use are in the User's Guide.
[. . . ] ALESIS M20 System Exclusive
Fourth Revision August 5, 1999
ALESIS PDAT SYSTEM EXCLUSIVE
The PDAT responds to all Alesis system exclusive ADAT commands, as well as MIDI Machine Control (MMC) commands. In addition, the PDAT also responds to and sends out Alesis system exclusive PDAT commands to access functions that may or may not be addressed by PDAT or MMC commands. [. . . ] <data byte> is repeated for <#data bytes>. <checksum word> is sent as 4 nibble-ized total checksum bytes. Note <#data bytes> must equal <24 Bit Address> must equal 0.
2.
Repeat the <#data bytes> <24 Bit Address> <data byte 1> . . <data byte N> sequence for programming of additional flash locations. Note that the <24 Bit Address> specifies the start of programming location for the specified <data byte>'s. Always complete the end of the transmission with the checksum sequence above. If <type> is 2, 3, 6, or 7 (data with interleaved checksum) then [data] is: <#data bytes> <24 Bit Address> <data byte 1> . . . .
PDAT System Exclusive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5
<#data bytes> <24 Bit Address> <data byte 1> . . <data byte N> <checksum>
where: <#data bytes> is sent as a single byte greater than 0 but less than 128. <24 Bit Address> is sent as 6 nibble-ized data bytes. For example, address 123456H is sent as 01H 02H 03H 04H 05H 06H. <data byte> is sent as 2 nibble-ized data bytes. [. . . ] Note that the <24 Bit Address> specifies the start of programming location for the specified <data byte>'s.
12H -
Tape Data F0H 00H 00H 0EH 16H <dev#> 12H <type> F7H <dev#> device <type> can be: 0 Prepare data to save to tape 1 Initiate a save data to tape
Action Commands 16H Locate F0H 00H 00H 0EH 16H <dev#> 16H <loc#> F7H <loc#> - 0. . 99=locate 0. . locate 99
17H -
Inject Tape F0H 00H 00H 0EH 16H <dev#> 17H F7H
18H -
Enter Deck Standby F0H 00H 00H 0EH 16H <dev#> 18H F7H
PDAT System Exclusive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6
Parameter Table Parameter Name VU Peak Hold Mode1 <param> <data> 01h 0. . 2 0 = No Peak Hold 1 = Momentary 2 = Continuous 02h 0 . . [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ALESIS ADAT-M20
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ALESIS ADAT-M20 will begin.
ALESIS ADAT-M20 V21 (208 ko)
