User manual ALESIS DEQ830

[. . . ] Reference Manual This page intentionally left blank. 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Table Of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Welcome!. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 DEQ830 Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 How to Use This Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] You can overwrite any of the 100 programs. First, if you're not in Program mode, get there by pressing the [PROGRAM] button. The Numerical LED Display will show you the number of the current program. All you have to do to call up a new program is turn the [VALUE] encoder. This enables you to quickly reach any program in the unit's memory. If the program number flashes when you try to select another program, this means that the Fast Program Select feature is off, and you will need to press the encoder to enfirm the program change. For more information, see pages 44 and 47. Basic operation: Edit mode If you're not already there, exit to Program mode by using the [PROGRAM] button. Then select Program 00 on the DEQ830 by using the [VALUE] encoder. The original factory Program 00 is a "flat" program, and it's easy to see why it's called that--the gain setting for every band is 0 dB. Calling up this program is almost the same as pressing the Bypass button, in that the audio passing through the unit will not be equalized in any way. Of course, the difference is that you can edit the program and hear the changes that you make. If you don't already know what kind of EQ you're looking for, this may be a good place to start. Just as Program 00 is a "flat" program, Curve 00 is a "flat" curve. We strongly recommend that you leave Curve 00's gain settings at 0 so that you may use it as a "clean slate" for building new curves from the ground up. Single Band Edit Pressing a [BAND SELECT] button puts the DEQ830 into Edit mode. The Numerical LED Display will now display the gain value in decibels (dB) of the band you just selected. In addition, one of the Band Gain LEDs above that [BAND SELECT] button will start blinking. If the gain value of that band is 0 dB, the green LED will blink. This means there is no gain change occurring in this frequency range. If it is higher or lower than that, one of the yellow LEDs will blink. This indicates that some amount of cut or boost is happening. Use the [VALUE] encoder to change the gain value of that band. Turning the [VALUE] encoder left will lower the gain value, or "cut" the chosen frequency; turning it right will raise the gain value, or "boost" the frequency. There is an overall range of +/- 12 dB of gain change available. 34 Basics of Equalization Band Solo The DEQ830 has a handy feature called Band Solo that allows you to "isolate" a given frequency while you are editing. This can help you determine exactly which band you need to highlight or deemphasize. [. . . ] (1. 4 kg) 65 Specifications This page intentionally left blank. 66 Warranty / Contact Alesis Limited Warranty ALESIS CORPORATION ("ALESIS") warrants this product to be free of defects in material and workmanship for a period of one (1) year for parts and for a period of one (1) year for labor from the date of original retail purchase. This warranty is enforceable only by the original retail purchaser and cannot be transferred or assigned. For the most effective service, the purchaser should register the purchase on the ALESIS website at http://www. alesis. com/support/warranty. htm. During the warranty period ALESIS shall, at its sole and absolute option, either repair or replace free of charge any product that proves to be defective on inspection by ALESIS or its authorized service representative. [. . . ]