User manual ALESIS DM PRO SETUP GUIDE

[. . . ] . 1 Before You Begin: Check DM Pro Kit Component List Rack and Mounting Hardware Checklist . . 10 Installing DM Pro Module and Attaching Cables Install Sound Module . . 10 Connect DM Pro Module and Trigger Pads . . 10 Ready to Play Adjust Drum Head Tension . [. . . ] Attach clamp to far right end of Left Side Tube. Make sure that the clamp's large wing nut is facing you. b) Loosen small wing nut and hex nut on Hardware Clamp until small opening is released. c) Identify Cymbal Boom and attach to Hardware Clamp by inserting arm into the smaller opening of the Hardware Clamp. Close the clamp and evenly tighten the hex nut and wing nut, providing equal pressure on both sides of Cymbal Boom. 8 DM Pro Kit Setup Guide d) Identify Crash Cymbal Pad and assemble spring collar by inserting screw end of spring collar through bottom of cymbal. Screw top piece of collar onto threading. e) Attach Crash Cymbal to Cymbal Boom by inserting Cymbal Boom's splined L-Mount into base of Crash Cymbal spring collar. Tighten using straightblade screwdriver. f ) Position Crash Cymbal at a comfortable height and angle. Note: For players who prefer a softer feel and quieter performance, the DM Pro Kit includes a Rubber Cymbal Mat that can be attached to the top surface of the Crash Cymbal. Attach Ride Cymbal a) Choose a Hardware Clamp and loosen large wing nut until clamp's large opening releases. Attach clamp to top of Right Upright Tube. Make sure that the clamp's large wing nut is facing you. b) Loosen small wing nut and hex nut on Hardware Clamp until small opening is released. c) Identify Ride Cymbal Pad and attach to Cymbal Boom by inserting Cymbal Boom's tube end into bottom of Ride Cymbal. d) Attach Cymbal Boom to Hardware Clamp by inserting Cymbal Boom's splined L-Mount into the smaller opening of the Hardware Clamp. Close the clamp and evenly tighten the hex nut and wing nut, providing equal pressure on both sides of Cymbal Boom. e) Position Ride Cymbal at a comfortable height and angle. Note: For players who prefer a softer feel and quieter performance, the DM Pro Kit includes a Rubber Cymbal Mat that can be attached to the top surface of the Ride Cymbal. Attach DM Pro Rack Mounting Tray a) Choose the last remaining Hardware Clamp and loosen large wing nut until clamp's large opening releases. Attach clamp to middle of Right Side Tube. Make sure that the clamp's large wing nut is facing you. b) Loosen small wing nut and hex nut on Hardware Clamp. c) Attach Rack Tray by inserting mounting tube into the smaller opening of the Hardware Clamp. [. . . ] All inquiries must be accompanied by a description of the problem. All authorized returns must be sent to ALESIS or an authorized ALESIS repair facility postage prepaid, insured and properly packaged. Proof of purchase must be presented in the form of a bill of sale, canceled check or some other positive proof that the product is within the warranty period. ALESIS reserves the right to update any unit returned for repair. [. . . ]