User manual ALINCO DJ-S4T

[. . . ] â· Use the setting wheel (B) to set the year (A). Use the setting wheel (B) to set the month (A). Use the setting wheel (B) to set the day (A). Use the setting wheel (B) to set the hour (A). [. . . ] Following installation, the actuator will perform an adjustment run so that it can adapt to the valve. The actuator will perform an adjustment run ("ADA" will appear on the display, operation not possible). â· After that, the actuator will be ready for operation (Auto mode). If the adjustment run was initiated prior to installation, or if an error message will be displayed (F1, F2, F3); press OK to move the motor back to the "INS" position. Setting the weekly program The weekly program allows you to set up to 3 separate heating periods (7 switching times) for each day of the week. Programming is performed in relation to the selected days, for which temperatures must be stored for a period from 00:00 to 23:59. Press and hold down the menu button for more than 3 seconds. The setting wheel can be used to select an individual day of the week, all working days, the weekend or the entire week (example shows working days selected). In addition, the display shows bars for every other switching interval. Set the temperature that is to be maintained from 0:00 onwards (example shows 17. The next switching time appears on the display (example shows 6:00). Comfort and set-back temperatures ) provides The comfort/set-back temperature button ( an easy and convenient way of switching between these two temperatures. Press and hold down the comfort/set-back temperature ) for more than 3 seconds. The moon symbol ( ) will appear together with the setback temperature. The temperature can even be modified in Auto mode at any time by using this button. The new setting will be retained until the program's next switching time. Setting the heating break If the heating is being switched off for the summer, you can save battery power. This involves opening the valve up fully. To activate the heating break, turn the setting wheel clockwise during manual operation (Manu) until "ON" appears on the display. â· To terminate the heating break, quit manual operation (Manu) or turn the setting wheel anticlockwise. Setting frost protection mode If you do not want the room to be heated, the valve can be closed. It will only be opened again if there is a risk of freezing due to frost. [. . . ] â· Press and hold down the menu button for more than 3 seconds. Intended use The energy-saving controller has been designed for the purpose of controlling a standard heating appliance valve. The device may only be operated indoors and must be protected from the effects of damp and dust, as well as solar radiation and sources of radiant heat. Using the device for a purpose or in a manner other than that described in this operating manual constitutes a breach of the "intended use" and shall invalidate the warranty and any liability claims. [. . . ]