User manual ALPATEC AC 9004

[. . . ] - Clean the air filter at least once every two weeks to prevent inferior fan operation because of dust. - Removal: Pull out the filter cover and remove the air filter from the filter cover. Use a lint-free cloth soaked with neutral detergent to clean the unit enclosure. Wash the tank using warm water (about 40°C) with neutral detergent. [. . . ] Power supply : - Insert the AC power plug to AC socket. - Do not connect the air conditioner to a multiple socket outlet, which is also being used for other electrical appliance. - Be sure the power supply is AC 220-240V 50Hz or 220V 60Hz. - Press the "MODE" (14) button several times until the cooling mode indicator (1) lights up. - Press the « + » and « -« temperature knob (9 and 10) to select your desired room temperature (16°C ­ 32°C). - Press the "FAN" knob (12) to choose the fan speed (low, middle, high). - Press the "MODE" (14) button several times until the dry mode indicator (2) lights up. - The fan will run at a fixed speed at this setting. - Press the "MODE" (14) button several times until the fan mode indicator (3) lights up. - Press the "FAN" knob (12) to choose the fan speed (low, middle, high). - Press the Timer on or off knob (18 and 15) when the air conditioner is off to select the time you need the unit starts to operate or stops. Both Timer on and Timer off can be set simultaneously. Check the unit is well placed and that you can have an easy access to the plug. 2· Plug the unit into a 220-240V 50Hz or 220V 60Hz ground electrical outlet. Make sure the water tank is correctly positioned inside the cabinet otherwise the unit does not operate. Press the M/A key (8) (On/Off switch) or "I/0" key for AC 9004 CTC model. Attach the other end of the duct to the window adapter B. Install to the wall adapter A onto the wall by using 4 wall plugs and screws (see accessories board). Attach the other end of the duct to the wall adapter A. Cover the hole using the adapter cap when not in use. The duct can be compressed or extended between 550mm and 2000mm, but it is desirable to keep the duct length to a minimum. WATER TANK SAFETY FEATURE This unit is equipped with a fall-safe switch mechanism which prevents the unit from condensing water in the event the water tank is accidentally displaced, and / or FULL with water. [. . . ] Do introduce neither sharp metallic objects, nor fingers inside the air swinging fins of the appliance. ⷠAlways switch off the appliance before unplugging it. ⷠUnplug the appliance before cleaning or changing any parts of the appliance or when it's not in use. All interventions made by a non-qualified person can be dangerous ; in this case guarantee conditions would cancel. [. . . ]