User manual ALPATEC ACS 143 EITP

[. . . ] Do not immerse appliance or power cord · This product is provided with its own power cord. Do not use any other electrical connection but the one supplied and recommended by the manufacturer. This could be dangerous and may damage the appliance. [. . . ] Never move or unplug by pulling the power cord. In order to avoid any electrical interference, keep away from electric sources. Do not use if it is not totally assembled and particularly if the protection grid is not secured, or the exhaust pipe is not assembled. Do not introduce parts through the grid. it has to be repaired by a qualified worker. Power cord has to be changed by a qualified person if needed. Brand Reference Rotative compressor Cooling class Annual consumption (kW) Cooling capacity (kW) EER Type Cooling mode Noise level dB (A) Power supply Dehumidification Air flow Fan speed Pipe length Suitable for room up to Indoor unit dimensions Outdoor unit dimensions Weight : ALPATEC : ACS 143 EITP : with R 410 A* / 0, 665 Kg :C : 765 : 4, 3 : 2, 81 : cooling only : by air : 56 : 220-240 V ~ 50 Hz : 68 liters / day : 420 m3 / h :3 :3m : 45 m² : 47, 6 x 35, 8 x 84 : 51 x 33 x 43 : 43 kg * Contains gas with fluorinated greenhouse effect that depends on the protocol of Kyoto. Press to raise the desired temperature (1°C / each pressure). Press to lower the desired temperature (1°C / each pressure). If it is more than 3°C, it turns to high, if it is less than 3°C, it turns to medium and if it is 0 it turns to slow. - If you don't use the remote control for a long time, please take out batteries. - At the end of your product's life, remove the batteries before you hand it for recycling. Put the indoor unit near a window or a door and the pipe through the opening. Make the opening as small as possible to have as less hot entering as possible. Outdoor unit can be put on the floor or fixed on the wall. The unit can be placed directly on a suitable external level base. Secure the outdoor unit into the two brackets by the steel spacer handles. Fix the brackets with wall-screws onto an outside wall. [. . . ] Fix the brackets with wall-screws onto an outside wall. 6meters high between the two units, moistures have to be removed using the drainage knob: - Remove the drainage knob at the back of the product - connect a Ø15/17 pipe to this hole - make sure the water flow away correctly Use a dry and wet cloth to clean the outside of the units. Remove and clean it using a vacuum cleaner or a damp cloth and dry it before replacing. [. . . ]