Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ALPATEC DH 20 E. We hope that this ALPATEC DH 20 E user guide will be useful to you.
Lastmanuals help download the user guide ALPATEC DH 20 E.
Detailed instructions for use are in the User's Guide.
[. . . ] Never pull the cord to unplug or move the appliance. â· Unplug the appliance before cleaning or changing any pieces. â· Do never introduce metallic objects to avoid any risks of electrical shocks. â· Never use accessories that are not recommended or supplied by the manufacturer. [. . . ] This light indicator is on when dehumidifier is running, and it is off when it stops. Water full light indicator : this light indicator is switch on when the water tank is full or when it is not in right position. Mode 1 light indicator : the appliance runs to keep an hygrometry rate of 35%. Mode 2 light indicator : the appliance runs to keep an hygrometry rate of 50%. Mode 3 light indicator : the appliance runs to keep an hygrometry rate of 60%. CONTINU mode light indicator : the appliance runs in continuous dehumidification mode. Install the appliance on flat ground and keep a clearance at least 20 cm in the front of the unit. If not, the water full light indicator is switch on. To stop the running, press OFF button, the RUN light indicator will switch off. You don't need to unplug the power cord except when the unit will be not use for a long time. If you switch the dehumidifier off for any reasons leave it 2 to 3 min before switching it on again. If the appliance does not come on after pressing ON button check that you have plugged the cord into the socket, and / or take the water tank out and in. Before moving the appliance, unplug the appliance and empty the water tank Caution : This dehumidifier has a 3 minutes circuit protector. The compressor of the unit, therefore, will only begin to operate 3 minutes after the dehumidifier is switched on. Pull the bucket out by placing your hands on each side and pull it towards you. when you have emptied the tank place it in the appliance. It is now ready to carry on dehumidifying. Push the hose into the drain hole (a PVC hose). Remove the water tank, then push the hose onto the connector located inside of the hole. The other part of the hose must be placed in a container. [. . . ] - Avoid spraying water onto the unit as this could cause electric shock or short circuit. CLEANING METHOD OF FILTER SCREEN Clean the air filter screen every two weeks with vacuum cleaner or water and dry the filter before re-use. - No power or power supply voltage too low. - Will return to normal after 3 minutes. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ALPATEC DH 20 E
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ALPATEC DH 20 E will begin.
