User manual ALPATEC DH 25 D

[. . . ] Never pull the cord to unplug or move the appliance. ⷠUnplug the appliance before cleaning or changing any pieces. ⷠDo never introduce metallic objects to avoid any risks of electrical shocks. [. . . ] If you want to display the temperature, then press MODE (17) button for a few seconds. - When the water tank is full, the product stops, the water full indicator (C) flash and the water level window (4) turns to red. A sound « bip » can be heard several times. - Take out and empty the water tank before you put it back. Please note that if the water tank has not been positioned well the water level window (4) remains red and the water full indicator (C) keeps on flashing. - When the product is running, press touch timer 14. Each pressure adds 1 h from 1 to 24 hours. Once the time has gone, the product stops. - To cancel the timer, press touch 14 till the remaining time disappears from the screen. - If you use the appliance in a very high humidity level, it may be more convenient to use continuous drainage. - Remove the mask hole at the rear of the unit (9) : break the 4 clamp. caution : this action is irreversible !(pictures 1, 2 and 3) - Remove the water tank, insert the water tube inside the hole and place it around the buzzard of water exit (in front of the hole inside the appliance, reachable by the water tank position. (pictures 4 , 5 and 6) - Replace the water tank to make sure that the water full indicator is off. [. . . ] Make sure that most of the doors and windows are closed 2. Is there something in the room producing lots of humidity?Check whether the unit is sitting on a level surface 1. [. . . ]