User manual ALPINE BLACKBIRD

[. . . ] Owner's Manual Version 1. 0 PMD-B100 PRECAUTIONS AND NOTICES Important Information Please Read Carefully Before Using This Product. This product is intended to safely provide turn by turn 7) There may be situations where the navigation system displays the vehicle's location erroneously. instructions to get you to a desired destination. Please Use your own driving judgment in this situation, make certain that all persons using this navigation taking into account current driving conditions. system carefully read these precautions and the folPlease be aware that in this situation the navigalowing instructions fully. [. . . ] The scroll bar disappears automatically after 2 seconds. Minimum scale is 1/16th mile and Maximum is 350 miles. Setting the Map Orientation Click icon to switch between North up and Heading Up views. In north up view, north is always at the top of the display. This makes it easy to determine your current heading with respect to the map. In heading-up view, the current direction is always pointing to the top of the display. This makes it easy to see the direction of the next turn on the map. GPS Status Click icon to view GPS receiving condition information from satellite. North Up Battery Status Shows status of the battery. (Lightning bolt) indicates that the battery is currently being charged. (3 bars) indicates that the battery has more than 60% charge. (2 bars) indicates that the battery has more than 40% charge. (1 bar) indicates that the battery has about 10% charge remaining. Heading Up 12 Setting a Destination Directly from Map Display 1 Touch anywhere on map screen. The current location arrow changes to Crosshair Cursor on the screen. 2 Move the cursor to the new desired street. Note: Use Map Scale Bar to zoom out the map if the destination is far from the current location. 3 Touch . 4 Select Set as Destination. 5 Touch OK to Proceed on the confirma- tion screen. Note: To use other functions on the confirmation screen, see page 14 for details. To cancel, touch Previous Screen icon. Switching Map Display Touch the Current Position to switch between Map and Arrow modes. You may also configure the system to switch between Map and Split screen modes (see page 27). Route Mode = Arrow (default mode) Arrow Mode Displays threesuccessive arrow maneuvers all the way to your destination while providing turn-byturn guidance prompts. Map Mode Shows a full-screen map of the area while providing turn-by-turn guidance prompts. Split Arrow/ Map Mode Displays a large arrow and larger next-street-name font along side a map screen while providing turn-byturn guidance prompts. Route Mode = Split 13 DESTINATION Setting a Destination by Address 1 Go to Main Menu Destination Address . Finding a Destination by Street Name First 2 Select Input Street Name. 3 Type the first characters of the street name. If there are unique matches, the system will automatically display a short list of street names. The list of applicable street names appears. 4 Select the desired street name from the list. 6 Select the desired city. If there are multiple matches, the system will list cities containing the street name and address number that you keyed in. 7 Confirmation screen appears. See below for details. Confirm Destination Screen OK to Proceed Set the destination and display a map. Change Method Find an alternative way. (Refer to page 22. ) 14 Change State If you want to choose a different state from the one shown on the screen, touch Change to switch to a different state. Selecting Letters Selected characters are displayed. Deleting one letter Adding one space Going to number screen Finding a Destination by City Name First 2 Select Input City Name. 3 Type the first few characters of the city name and press OK. If there are unique matches, the system will automatically display a short list of city names. Select the desired city. 4 Type the first characters of the street name. Touch OK. The list of applicable street names appears. Select the desired street. 5 6 Enter the street number. [. . . ] This Warranty does not cover the following: THE TERM "INCIDENTAL DAMAGES" REFERS TO EXPENSES OF 1 Damage occurring during shipment of the product to Alpine TRANSPORTING THE PRODUCT TO THE ALPINE SERVICE CENfor repair (claims must be presented to the carrier). TER, LOSS OF THE ORIGINAL PURCHASER'S TIME, LOSS OF 2 Damage caused by accident or abuse, including burned voice THE USE OF THE PRODUCT, BUS FARES, CAR RENTALS OR coils caused by over-driving the speaker (amplifier level is OTHERS COSTS RELATING TO THE CARE AND CUSTODY OF turned up and driven into distortion or clipping). THE TERM "CONSEQUENTIAL DAMAGES" Speaker mechanical failure (e. g. REFERS TO THE COST OF REPAIRING OR REPLACING OTHER Cracked or damaged LCD panels. [. . . ]