User manual ALPINE CDA-7850R

[. . . ] OWNER'S MANUAL Please read this manual to maximize your enjoyment of the outstanding performance and feature capabilities of the equipment, then retain the manual for future reference. The exclamation point within an equilateral triangle and "WARNING" are intended to alert the user to the presence of important operating instructions. Doing so may lead to accident, fire or electric shock. When problems occur such as a lack of sound or video, foreign objects inside the unit, smoke coming out, or noxious odors, stop use immediately and contact the dealer where you bought the equipment. [. . . ] If there is no AF station, the display shows "SEEK END. The display shows "AF" when the RDS mode is activated. Press the F1 through F6 buttons in which your desired RDS station is preset. If the preset station's signal is weak, the unit automatically searches and tunes to a stronger station in the AF (Alternative Frequencies) list. If the preset station and the stations in the AF list cannot be received: The unit searches again for a station in the PI (Programme Identification) list. If there are still no stations receivable in the area, the unit displays the frequency of the preset station and the preset indicator disappears. If the signal level of the Regional (Local) station being tuned becomes too weak to receive, press the same preset location button to tune in a Regional station in other district. Press and hold the INTLZ button for at least 3 seconds to activate the setting mode. Press the TUNE button to turn on or off the REG (Regional) mode. In the REG OFF mode, the unit automatically keeps receiving the related local RDS station. Press and hold the INTLZ button for at least 3 seconds to deactivate the setting mode. When a traffic information station is tuned in, the TP indicator lights up. Traffic information is heard only when it is being broadcast. If traffic information is not being broadcast, the unit is set in the standby mode. When a traffic information broadcast begins, the unit automatically receives it and the display shows "TRF-INFO" for 5 seconds, then returns to the previous display. When traffic information broadcast is over, the unit will automatically set in the standby mode. If the traffic information broadinformación sobre el tráfico des informations routières cast signal falls below a certain desciende por debajo de cierto tombe sous un certain level, the unit remains in the nivel, la unidad permanecerá en el niveau, l'appareil reste en receiving mode for 1 minute. If you do not want to listen to the "T. If the volume level is changed información sobre el tráfico. Si cambia el volumen cuando esté while receiving traffic informapour la réception des recibiendo información sobre el prochaines informations tion, the changed volume level tráfico, la unidad memorizará el routières. Si vous changez le niveau du information is received next time, próxima vez que reciba volume pendant la réception the volume level will be autoinformación sobre el tráfico, la d'informations routières, ce matically adjusted to the level recibirá automáticamente al nivel niveau sera mémorisé et la memorized. The Programme Type of the station being currently received will be displayed for 5 seconds. [. . . ] We recommend not using these accessories on discs played in Alpine CD players. If you encounter a problem, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer. [. . . ]