User manual ALPINE CDA-7998R

[. . . ] R EN CDA-7998R FM/MW/LW/RDS CD Player · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] · Do not expose the disc to direct sunlight. · Do not affix stickers or labels and do not write on the surface. · Clean the disc when it is dusty. · Make sure that there are no bumps around the disc. · Do not use commercially available disc accessories. Do not leave the disc in the car or the unit for a long time. Never expose the disc to direct sunlight. Heat and humidity may damage the CD and you may not be able to play it again. Playback 1 Press the c button. The movable display will open. Insert a disc with the label side facing up. 2 Insert a disc with the label side facing up. The disc will be pulled into the unit automatically. The movable display will close and playback will begin. 21-EN CD Player Operation M. I. X. (Random Play) SOURCE BAND Select buttons (1 through 9, 0, , ) 1 Press the M. I. X. The tracks on the disc will be played back in a random sequence. button again to turn off the M. I. X. NOTES · If a CD Changer equipped with the ALL M. I. X. In this mode, the tracks on all the CDs in the current magazine will be included in the random playback sequence. g DN f UP REPEAT M. I. X. SCAN M. I. X. ALL M. I. X. (off) Music Sensor (Skip) 1 Momentarily press the g DN button once during CD play to return to the beginning of the current track. If you wish to access a track further back, repeatedly press until you reach the desired track. Press the f UP button once to advance to the beginning of the next track. If you wish to access a track further ahead, press repeatedly until the desired track is reached. · CD FUNCTION In case a 6-disc or 12-disc CD changer is connected: In CD changer mode, press the F button to "FUNCTION ON" display and go to step 1 within 5 seconds. The FUNCTION mode is canceled if there is no operation performed within 5 seconds. Scanning Programmes 1 NOTE The music sensor feature is functional in the play or pause mode. Press the SCAN button to activate the Scan mode. The first 10 seconds of each track will be played back in succession. To stop scanning, press the SCAN button to deactivate the Scan mode. Fast Forward and Backward NOTE · CD FUNCTION In case a 6-disc or 12-disc CD changer is connected: In CD changer mode, press the F button to display "FUNCTION ON" and go to step 1 within 5 seconds. [. . . ] 3 Remote Turn-On Lead (Blue/White) Connect this lead to the remote turn-on lead of your amplifier or signal processor. 4 Switched Power Lead (Ignition) (Red) Connect this lead to an open terminal on the vehicle's fuse box or another unused power source which provides (+) 12V only when the ignition is turned on or in the accessory position. 5 Power Antenna Lead (Blue) Connect this lead to the +B terminal of your power antenna, if applicable. # DC/DC Converter NOTES · Do not install the converter at a location subjected to water such as under the floor mat or air conditioner. · Do not bundle the DC/DC converter cable with other audio cables. [. . . ]