User manual ALPINE CDA-9855

[. . . ] · ISTRUZIONI PER L'USO Si prega di leggere prima di utilizzare il attrezzatura. · ANVÄNDARHANDLEDNING Innan du använder utrustningen bör du läsa igenom denna användarhandledning. EN DE FR ES IT ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel. : (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U. S. A. [. . . ] If the preset station and the stations in the AF list cannot be received: The unit searches again for a station in the PI (Programme Identification) list. If there are still no stations receivable in the area, the unit displays the frequency of the preset station and the preset indicator disappears. If the signal level of the Regional (Local) station being tuned becomes too weak to receive, press the same preset location button to tune in a Regional station in other district. NOTE For presetting the RDS stations, refer to the Radio Operation section. The RDS stations can be preset in the FM1, FM2 and FM3 bands only. 3 When the RDS station signal received has become weak: AF seek mode, press and hold the TITLE button for at least 2 seconds to have the unit automatically seek a stronger station in the AF list. If there is no AF station, the display shows "SEEK END. " 12-EN Receiving RDS Regional (Local) Stations PTY (Programme Type) Tuning 1 2 1 2 Press and hold the INTLZ button for at least 2 seconds to activate the setting mode. Press the f UP button repeatedly to select "REG" Each press of the f UP button scrolls the modes as shown: FM-LV REG PTY31 AMBER DIM SUB DEMO AUX SCR MUTE BEEP NOTE If you press the DN g button the display scrolls in reverse sequence. Press the "F" button. Press the PTY button to activate the PTY mode. The Programme Type of the station being currently received will be displayed for 5 seconds. · If there is no receivable PTY broadcast, "NO PTY" will be displayed for 5 seconds. · If no RDS station can be received, the display shows "NO PTY. " NOTE If no button is pressed within 5 seconds after pressing the PTY button, the PTY mode will be automatically cancelled. 3 4 Press the TUNE button to turn on or off the REG (Regional) mode. In the REG OFF mode, the unit automatically keeps receiving the related local RDS station. Press the DN g and f UP buttons to select a traffic information station if necessary. · When a traffic information broadcast starts, the unit automatically mutes the CD player or the regular FM broadcast. · When the traffic information broadcast finishes, the unit automatically returns to the original source play before the traffic information broadcast began. · When traffic information stations cannot be received: In the tuner mode: When the TP signal can no longer be received for over 1 minute, the "T. INFO" indicator blinks. In the CD mode: When the TP signal can no longer be received, the traffic information station of another frequency will be selected automatically. NOTE The receiver is equipped with the EON (Enhanced Other Networks) function in order to keep track of additional alternative frequencies to the AF list. The EON indicator appears while an RDS EON station is being received. If the station being received does not broadcast the traffic information, the receiver automatically tunes in the related station that broadcasts the traffic information when it occurs. 1 2 Press the "F" button. PTY button to activate the PRIORITY PTY mode. "PRIO-PTY" is displayed for 2 seconds and then the programme type for 3 seconds. The initial setting is "NEWS. " NOTE If no button is pressed within 5 seconds after pressing the P. PTY button, the PRIORITY PTY mode is automatically cancelled. 3 Press the DN g or f UP button within 5 seconds while "NEWS" is being displayed to choose a desired programme type. [. . . ] Connect all the leads of the CDA-9855 according to details described in the CONNECTIONS section. NOTE For the screw , provide a proper screw to the chassis installing location. 27-EN Installation and Connections Connection ISO Antenna Convertor Plug 1 (Pink/Black) AUDIO INTERRUPT IN (Blue/White) REMOTE TURN-ON (Orange) DIMMER Antenna ISO Antenna Plug 2 3 To vehicle phone To amplifier or equalizer To the instrument cluster illumination lead To power antenna 4 (Red) IGNITION 5 9 (Blue) POWER ANT (Black) GND 6 ! Ignition Key choke coil 7 (Yellow) BATTERY Battery 8 = " : CD Changer (Ai-NET) (Sold Separately) Speakers ; > Amplifier Front CDA-9855 / < > # Amplifier Rear or Subwoofers* Ai-NET Speakers $ & ( Rear Left NORM EQ/DIV ) ~ + , % . Front Left Front Right Rear Right When Subwoofer is set to OFF: Output is from Rear speakers. When Subwoofer is set to ON: Output is from Subwoofer. For details on how to set the Subwoofer to ON/OFF, see "Subwoofer On and Off" on page 7. 28-EN 1 Antenna Receptacle Connect to the supplied ISO antenna convertor plug. 2 Audio Interrupt In Lead (Pink/Black) Connect this lead to the Audio Interface output of a cellular phone which provides ground shorting when a call is received. 3 Remote Turn-On Lead (Blue/White) Connect this lead to the remote turn-on lead of your amplifier or signal processor. [. . . ]