User manual ALPINE CDA-9883

[. . . ] R MP3/WMA/AAC CD Receiver EN CDA-9883 FR ES · OWNER'S MANUAL Please read before using this equipment. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC. [. . . ] CD-DA&MP3: CD data, MP3/WMA/AAC files in mixed mode, and multi-session discs can be played back. · Perform this setting before inserting a disc. If a disc has already been inserted, remove it first. (If you use an MP3 changer, you have to change discs. ) 18-EN External Device Connecting to an External Amplifier POWER IC ON (Initial setting) / POWER IC OFF Setting the AUX Mode (V-Link) AUX IN ON / AUX IN OFF (Initial setting) When an external amplifier is connected, sound quality can be improved by stopping the power supply of the built-in amplifier. POWER IC OFF: Use this mode when the line output of this unit is used to drive an external amplifier. In this setting, the head unit's internal amplifier is turned OFF and can not drive speakers. Front left Front right Rear left Rear right You can input TV/video sound by connecting an optional Ai-NET/RCA Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C) to this component. You can change the AUX name display when AUX IN is set to ON. Press / /ENT when AUX IN is set to ON, and select AUX NAME by turning the Rotary encoder, and then press / /ENT. After that, turn the Rotary encoder to select the desired AUX name. If the KCA-410C is connected, it is possible to select two AUX names. · Via KCA-410C, up to 2 external devices with RCA output can be connected. In this case, press SOURCE/ to select AUX mode and then press BAND to select your desired device. Amplifier Changer Name Setting CHANGER (Initial Setting) / USB / PORTABLE Amplifier This setting is used when the head unit is connected to the USB Adapter for MP3 (KCA-620M). You can set the name to be displayed on the unit depending on the device to which the USB Adapter for MP3 (KCA-620M) is connected. POWER IC ON : The speakers are driven by the built-in amplifier. Setting the External Digital Input D-AUX ON / D-AUX OFF (Initial setting) Speakers SPEAKER RIGHT FRONT Front right When an ALPINE Ai-NET compatible digital audio processor (PXA-H701) and a DVD player (DVE-5207) not compatible with AiNET are connected, set Digital AUX to ON to enjoy 5. 1-channel surround sound. · Press SOURCE/ , and select the DIGITAL-AUX mode, and adjust the volume, etc. · Depending on the connected audio processor, DVD player sound may continue to be output, even though the source is changed to another one. If this occurs, set the DVD player's power to OFF. SPEAKER RIGHT REAR Rear right HD Radio (Only when HD Radio is connected) SPEAKER LEFT REAR Rear left HD Radio Station Call Setting (STATION CALL) SHORT (Initial setting) / LONG SPEAKER LEFT FRONT In the HD Radio mode, the number of display characters for the HD Radio station name can be selected. Front left SHORT : LONG : 7 characters (FM) 4 characters (AM) 56 characters · No sound is produced by the system when the power output is set to OFF. Digital Seek ON/OFF Setting DIG SEEK ON / DIG SEEK OFF (Initial Setting) ON : OFF : SEEK UP/DOWN is used only for Digital Radio Station. SEEK UP/DOWN is used for all Radio Stations. General Setting Turning Mute Mode On/Off (INT Mute) MUTE ON / MUTE OFF (Initial setting) If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device. 19-EN SAT Radio Receiver (Optional) / Rotary encoder /ENT SOURCE/ BAND 1 2 3 4 Press Press or or to select desired category. to select the desired channel. or will change channels Holding down continuously. · When using the optional remote control (RUE-4190, etc. ), an SAT Radio Channel can be directly called up with the numeric keypad of the remote control. 1 While in XM or SIRIUS Radio mode, enter the Channel number you want to call up with the numeric keypad on the remote control. 2 Press ENTER on the remote control within 5 seconds to receive the Channel. If the channel number is 3 digits, the Channel is automatically received after the channel number has been input. /ESC /RTN FUNC. /SETUP Preset buttons TITLE (1 through 6) Checking the SAT Radio ID Number A unique Radio ID number is required to subscribe to SAT Radio programming. Each third party XM or SIRIUS radio comes with this number. This number is an 8 character (for XM Radio) or 12 character (for SIRIUS Radio) alphanumeric number. [. . . ] Products purchased in the Canada are covered only in the Canada. are covered only in the U. S. A. C You must supply proof of your purchase of the product. D You must package the product securely to avoid damage during shipment. To prevent lost packages it is recommended to use a carrier that provides a tracking service. LENGTH OF WARRANTY: This Warranty is in effect for one year from the date of the first consumer purchase. HOW WE LIMIT IMPLIED WARRANTIES: ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR USE AND MERCHANTABILITY ARE LIMITED IN DURATION TO THE PERIOD OF THE EXPRESS WARRANTY SET FORTH ABOVE AND NO PERSON IS AUTHORIZED TO ASSUME FOR ALPINE ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF THE PRODUCT. WHO IS COVERED: This Warranty only covers the original purchaser of the product, who must reside in the United States, Puerto Rico or Canada. WHAT IS COVERED: This Warranty covers defects in materials or workmanship (parts and labor) in the product. HOW WE EXCLUDE CERTAIN DAMAGES: ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES CAUSED BY THE PRODUCT. [. . . ]