User manual ALPINE CDE-135BT

[. . . ] FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/ ТОЛЬКО ДЛЯ ИСПОЛЬЗОВАНИЯ В АВТОМОБИЛЯХ/DO UŻYCIA TYLKO W SAMOCHODZIE/ΓΙΑ ΧΡΗΣΗ ΜΟΝΟ ΣΕ ΑΥΤΟΚΙΝΗΤΟ EN R CD RECEIVER WITH DUAL USB AND BLUETOOTH DE CDE-135BT FR ES • OWNER’S MANUAL Please read before using this equipment. • BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. • MODE D’EMPLOI Veuillez lire avant d’utiliser cet appareil. • MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] OFF: Hands-Free Phone function is not used. BLUETOOTH Audio setting (AUDIO) ON: Select when you want to use BLUETOOTH Audio function. OFF: BLUETOOTH Audio function is not used. BLUETOOTH SETUP The following steps 1 to 5 are common to the various BLUETOOTH functions. For details, refer to each individual function. Setting the BLUETOOTH Device Note • Set “HFP” or “AUDIO” to ON, and then perform BLUETOOTH SETUP operation. Refer to “Setting the BLUETOOTH Connection (BT IN)” on page 24. Select one of 3 connected BLUETOOTH compatible devices that you previously registered.  Setting item: PAIRED DEV 1 2 1 2 3 Press and hold AUDIOSETUP for at least 2 seconds to activate the SETUP mode. Turn the Rotary encoder to select “BLUETOOTH”, and then press ENTER. The BLUETOOTH setup mode is activated. Turn the Rotary encoder to select a BLUETOOTH compatible device you want to use (you want to change connection) and then press ENTER. Turn the Rotary encoder to select “CONNECT” to connect the selected device. The connected device is marked with “l”. Select “DISCONNECT” to disconnect this device. Select “CLEAR” when you want to clear the device from the device list. Turn the Rotary encoder to select the desired items and then press ENTER. BLUETOOTH: BT IN*1  PAIRED DEV  VISIBLE M*1  SEARCH DEV*1  CALL SOUND*2  CALLER ID*2  PB UPDATE*2  BT MENU*2  PB ORDER*2  AUTO ANS*2  SEV NAME*2  SPEAKER SL*2  FW VERSION  FW UPDATE*1 Notes • If the connection is successfully changed, “CONNECTED” is displayed for 2 seconds and the  indicator lights up, then the display returns to the SETUP screen. • If all the 3 positions have been registered, you cannot register the 4th device. To register another device, you need to delete one of the devices from position 1 to 3 first. 24-EN Setting the Visible Mode You can set whether this unit can be recognised or not from a BLUETOOTH compatible device. Normally set this to VISI M ON. Sound Auto setting (AUTO SET) Depending on your calling environment, choose one of the settings below which gives the best sound quality.  Setting item: VISIBLE M Setting contents: VISI M ON (Initial setting) / VISI M OFF VISI M ON: Enable recognition of this unit from the BLUETOOTH compatible device. VISI M OFF: Disable recognition of this unit from the BLUETOOTH compatible device. Setting contents: TYPE1 (Initial setting) / TYPE2 / TYPE3 / TYPE4 / TYPE5 TYPE1: Standard Mode (recommended) TYPE2: Enhances the noise reduction TYPE3: Enhances the echo-cancel TYPE4: Enhances both noise reduction and echo-cancel TYPE5: Weakens both noise reduction and echo-cancel Pairing a BLUETOOTH Device from the unit If your BLUETOOTH device is not immediately pairing, the head unit can perform a search. The search can find paired or unpaired devices. Note • The functions below are designed to improve the sound quality of the outgoing call. Noise reduction: This function can reduce the road noise, but excessive enhancement may affect the sound quality of the call. Echo-cancel: This function can reduce the echo, but excessive enhancement may affect the sound quality of the call.  Setting item: SEARCH DEV 1 2 3 When SEARCH DEV is selected and “SEARCHING” is displayed, the search gets started. Note • The “SEARCHING” operation can be stopped by pressing . Setting the caller information display ON/ OFF You can choose whether to use this function according to the following setting. Turn the Rotary encoder to select the name of the device to be connected from the Device Search list and then press ENTER. If this unit is successfully connected to a BLUETOOTH compatible device, “CONNECTED” is displayed, and then the unit returns to normal mode. Depending on the mobile phone, it may be necessary to input a passcode. In this case, “CODE 0000” is displayed. Input the passcode “0000” in the BLUETOOTH compatible device to make the pairing. After the pairing is completed, the unit will automatically connect to the BLUETOOTH compatible device. If you input the wrong passcode or the communication fails, “FAILED” is displayed.  Setting item: CALLER ID Setting contents: ON (Initial setting) / OFF If you want to keep the ID information of the caller from others, set this item to OFF. Depending on the stored ID information, while you are dialing a number, only telephone number will be displayed or telephone name will be displayed as “ID UNSENT”; During a call, “NO NAME” will be displayed; Or while a call is dialing in, only telephone number will be displayed or telephone name will be displayed as “NO NAME”. Phone Book Auto Update ON/OFF You can set whether to update the phone book automatically. Setting the BLUETOOTH sound quality Change these settings to improve the quality of the outgoing or incoming call.  Setting item: PB UPDATE Setting contents: ON (Initial setting) / OFF ON: When the mobile phone reconnects with this unit, the phone book will update. [. . . ] • If sound is not output or USB Memory is not recognized even when USB Memory is connected, remove USB Memory once, then connect it again. • Change to a source other than the USB Memory mode, then remove the USB Memory. If the USB Memory is removed in the USB Memory mode, data may be damaged. • Route the USB cable away from another cables. Interface cable for iPod (included with iPod/iPhone) This unit lock case Rear USB Connector Cable (supplied) Mounting the Microphone For the sake of safety, mount the microphone in the following location. [. . . ]