User manual ALPINE CDE-173BT QUICK REFERENCE GUIDE

[. . . ] · ISTRUZIONI PER L 'USO Si prega di leggere prima di utilizzare il attrezzatura. · ANVÄNDARHANDLEDNING Innan du använder utrustningen bör du läsa igenom denna användarhandledning. · GEBRUIKERSHANDLEIDING Lees deze aanwijzingen aandachtig alvorens dit toestel te gebruiken. · INSTRUKCJA OBSLUGI Prosimy zapozna si z t instrukcj przed przystpieniem do uytkowania urzdzenia. · . Designed by ALPINE Japan 68-09359Z74-B PL GR ALPINE ELECTRONICS MARKETING, INC. [. . . ] · "NO SUPPORT" is displayed when the desired text information cannot be displayed on this unit. · The text or tag information may not be correctly displayed, depending on the contents. 17-EN Using the Front AUX Input Terminal (CDE-102Ri/CDE-103BT/CDE-104BTi only) Connect a portable music player, etc. by simply connecting it to the input on the front panel. An optional adapter cable is required (standard RCA to 3. 5ø mini-phono plug or 3. 5ø to 3. 5ø mini phono plug). SETUP You can flexibly customize the unit to suit your own preferences and usage. From the SETUP menu, Sound Customizing, Visual Customizing, etc. , can be modified. Rotary encoder (AUDIO) FUNC. /SETUP SOURCE/ Press SOURCE/ , and select the AUX mode to listen to the portable device. TUNER DISC BT AUDIO*3 USB AUDIO iPod*1/AUX+*2 AUX TUNER *1 Only when the iPhone/iPod is connected and AUX+ SETUP is set to OFF, refer to "Setting the AUX+ SETUP Mode" (page 20). *2 Displayed only when AUX+ SETUP is set to ON, refer to "Setting the AUX+ SETUP Mode" (page 20). *3 Only for CDE-173BT/CDE-173BTM/CDE-102Ri and BT IN is set to BT ADAPTER. Refer to "Bluetooth Setting" (page 19). Portable player, etc. /SOUND / /ENT * The illustrator is for CDE-104BTi. Main unit Use steps 1 to 4 to select one of the SETUP modes to modify. See the applicable section below for details about the selected SETUP item. 1 2 or Press and hold FUNC. /SETUP for at least 2 seconds to activate the SETUP mode. Turn the Rotary encoder to select the desired SETUP menu, and then press / /ENT. (e. g. Select SUBWOOFER) BT IN*1 PLAY MODE INT MUTE*2 AUX+ SETUP AUX+ NAME*3 AUX NAME*4 POWER IC DEMO 5 SUBWOOFER SUBW SYS* ILLUMINATI*6 SCROLLTYPE TEXT SCR FM-LEVEL REGIONAL*7 PI SEEK*8 BT IN Optional adapter cable (RCA pin plugs [red, white] 3. 5ø miniplugs) or (3. 5ø miniplugs). · If a USB memory is directly connected to the USB terminal, the size or shape may interfere with driving operations, therefore, avoid connecting an AUX input terminal and a USB memory at the same time. *1 Displayed only when INT MUTE is set to OFF, and the mode is set to other than BT AUDIO. In this case, you can select playback of a single session only, containing the CD data. When a disc contains both CD and MP3/WMA/AAC data, playback starts from the CD data portion of the disc. CD-DA: Only the CD data in Session 1 can be played back. CDDA/MP3: CD data, MP3/WMA/AAC files in mixed mode, and multi-session discs can be played back. Front right SPEAKER RIGHT REAR Rear right · Perform this setting before inserting a disc. If a disc has already been inserted, remove it first. SPEAKER LEFT REAR Rear left External Device Turning Mute Mode On/Off (INT MUTE) MUTE ON / MUTE OFF (Initial setting) SPEAKER LEFT FRONT Front left If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device. · No sound is produced by the system when the power output is set to OFF. Setting the AUX+ SETUP Mode Connecting to an External Amplifier (POWER IC) POW ON (Initial setting) / POW OFF AUX+ ON / AUX+ OFF (Initial setting) When an external amplifier is connected, sound quality can be improved by stopping the power supply of the built-in amplifier. POW OFF: Use this mode when the line output of this unit is used to drive an external amplifier. In this setting, the head unit's internal amplifier is turned OFF and cannot drive speakers. An external device (such as a portable music player) can be connected to the Full Speed connector of this unit. A conversion cable (KCE-237B) for build up the AUX IN (optional) is required. A portable music device and an iPhone/iPod cannot be connected to the Full Speed connector at the same time. Set to ON when a portable device is connected. If SOURCE/ is pressed and AUX+ is selected, the sound of the portable device is input to the unit. AUX+ OFF: Set to OFF when an iPhone/iPod is connected. AUX+ ON: CDE-102Ri/CDE-103BT/CDE-104BTi: Front left Front right Rear left Rear right CDE-173BT/CDE-173BTM: Front left Front right Amplifier You can change the AUX+ name display when AUX+ is set to ON. Press / /ENT when AUX+ is set to ON, and select AUX+ NAME by turning the Rotary encoder, then press / /ENT. [. . . ] This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Install the detachable front panel. Pressure Plates* This unit Lock Pin * If the installed mounting sleeve is loose in the dashboard, the pressure plates may be bent slightly to remedy the problem. Remove the mounting sleeve from the main unit (see "Removal" on page 35). Slide the mounting sleeve into the dashboard and fix it with the metal shackles. 34-EN Removal 1. Use a small screwdriver (or similar tool) to push the locking pins to the "up" position (see above drawing). [. . . ]