User manual ALPINE CDE-W296BT

[. . . ] Book Page 2 Thursday, September 11, 2014 3:15 PM WARNING This symbol means important instructions. Failure to heed them can result in serious injury or death. dO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop. [. . . ] In order to optimize the BASS ENGINE SQ, we recommend the following power amplifier setup. After setting up, you can adjust the BASS ENGINE SQ Level according to the music. 3 Set the BASS ENGIN of this unit to “ON”, and the BASS ENGINE SQ Level to “+3”. 4 Play a song of the genre you frequently listen to, and adjust gain of the power amplifier. (Réglage initial : +3) 3 • From Level 0 to Level 6, the effect of BASS ENGINE SQ increases level by level. Book Page 9 Thursday, September 11, 2014 3:15 PM Applying TuneIt / Anwenden von TuneIt / Utilisation de l’application TuneIt • CDE-W296BT • CDE-195BT English This unit’s sound tuning is programmable from a connected Smartphone. Through this unit, it is also possible to receive and respond to information from Alpine’s Social Network Service (SNS) available through the connected Smartphone. The installed TuneIt App should be launched on the Smartphone before connection to the head unit. Book Page 10 Thursday, September 11, 2014 3:15 PM Adjusting the sound via the Smartphone / Anpassen des Klangs über das Smartphone / Réglage du son via le smartphone English Deutsch Français 1 Make sure the unit is powered on. Launch the TuneIt App on the Smartphone. Adjust the unit’s sound accordingly on the Smartphone. 2 <For all other devices> When prompted by the head unit, input the PIN code “0000” on the Bluetooth compatible device. When pairing is successful, “CONNECTED” will be displayed on the head unit. Book Page 22 Thursday, September 11, 2014 3:15 PM Calling / Tätigen von Anrufen / Appel CDE-W296BT CDE-195BT English Deutsch Français 1 Press to activate the outgoing method list selection mode. 3 4 Select the desired name or telephone number. Book Page 23 Thursday, September 11, 2014 3:15 PM Answering the Incoming Call / Annehmen eines eingehenden Anrufs / Répondre à un appel entrant CDE-W296BT CDE-195BT The call starts. Hanging up the Telephone / Auflegen des Telefonhörers / Raccrocher le téléphone CDE-W296BT CDE-195BT English Deutsch Français End the call. Book Page 24 Thursday, September 11, 2014 3:15 PM Voice Control Operation / Sprachsteuerungsbetrieb / Fonction de contrôle vocal CDE-W296BT CDE-195BT English Deutsch Français 1 Press and hold for at least 2 seconds to activate the Voice Recognition mode. 2 After the Voice Recognition mode is activated and “SPEAK” is displayed, you can make a phone call, play a song, etc. , via this unit by inputting voice control commands*. * Please refer to your Smartphone manual for other voice control commands. Book Page 25 Thursday, September 11, 2014 3:15 PM CDE-W296BT CDE-195BT English • You can perform this operation only when a Voice recognition compatible Smartphone is connected. [. . . ] Book Page 32 Thursday, September 11, 2014 3:15 PM Setting the Time / Einstellen der Zeit / Réglage de l’heure • CDE-W296BT • CDE-195BT CDE-W296BT CDE-195BT English Deutsch Français Activate the SETUP mode. 1 Press and hold for at least 2 seconds. 8 Press and hold for at least 2 seconds. Book Page 36 Thursday, September 11, 2014 3:15 PM • Windows Media, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. [. . . ]