User manual ALPINE CDM-7856R

[. . . ] R CDM-7859R CDM-7858R CDM-7856R FM/MW/LW/RDS CD Receiver · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] The frequency on the display continues to change while the automatic memory is in progress. When the automatic memory has been completed, the tuner goes to the station stored in the preset location No. 1. NOTE If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began. 9-EN RDS Operations BAND T. INFO g DN f UP SETUP/F AF PTY Setting RDS Reception Mode and Receiving RDS Stations The RDS (Radio Data System) is a radio information system using the 57 kHz subcarrier of regular FM broadcast. The RDS allows you to receive a variety of information such as traffic information, station names, and to automatically re-tune to a stronger transmitter that is broadcasting the same programme. Recalling Preset RDS Stations 1 2 3 4 Press the F button so that the F (Function) indicator lights up. Press the AF button to activate the RDS mode. Press the F button to activate the normal mode. Make sure that the F indicator light goes out, then press the preset button in which your desired RDS station is preset. If the preset station's signal is weak, the unit automatically searches and tunes to a stronger station in the AF (Alternative Frequencies) list. If the preset station and the stations in the AF list cannot be received: Press the same preset button again within 5 seconds to have the unit search for a station in the PI (Programme Identification) list. If there are still no stations receivable in the area, the unit displays the frequency of the preset station and the preset indicator disappears. If the signal level of the Regional (Local) station being tuned becomes too weak to receive, press the same preset button to tune in a Regional station in other district. NOTE For presetting the RDS stations, refer to the Radio Operation section. The RDS stations can be preset in the F1 and F2 bands only. 1 2 3 Press the F button so that the F (Function) indicator lights up. Press the AF button to activate the RDS mode. Press the g DN or f UP button to tune in the desired RDS station. NOTE When the BAND button is pressed and held for more than 2 seconds while a station name is displayed, the display shows the station frequency for 5 seconds. 5 4 5 Press the AF button again to deactivate the RDS mode. Press the F button to activate the normal mode. The F indicator light goes out. Tips The RDS digital data includes the followings: PI Programme Identification PS Programme Service Name AF List of Alternative Frequencies TP Traffic Programme TA Traffic Announcement PTY Programme Type EON Enhanced Other Networks 10-EN Receiving RDS Regional (Local) Stations PTY (Programme Type) Tuning 1 2 3 4 Press and hold the SETUP button for at least 3 seconds to activate the setting mode. Press the g DN or f UP button to select the REG mode. Press the BAND button to turn on or off the REG (Regional) mode. In the REG OFF mode, the unit automatically keeps receiving the related local RDS station. Press the SETUP button to deactivate the setting mode. 1 2 Press the F button so that the F (Function) indicator lights up. Press the PTY button to activate the PTY mode, while the unit is in Radio (FM receiving) mode. The Programme Type of the station being currently received will be displayed for 5 seconds. [. . . ] If your vehicle does not have the Mounting Support, reinforce the head unit with the metal mounting strap (not supplied). Connect all the leads of the CDM7859R/CDM-7858R/CDM-7856R according to details described in the CONNECTIONS section. NOTE For the screw , provide a proper screw to the chassis installing location. CDM-7859R/CDM-7858R/ CDM-7856R Screws (M5 × 8) (Included) Mounting Bracket 19-EN Installation and Connections Connection Antenna 1 ISO Antenna Plug 2 (Pink/Black) (Blue/White) AUDIO INTERRUPT IN REMOTE TURN-ON To vehicle phone 3 To amplifier or equalizer (Red) IGNITION 4 5 6 8 9 To power antenna (Black) GND (Blue) POWER ANT Ignition Key 7 (Yellow) BATTERY Battery # A DIN Connector PIN Configuration lgnition Data Ground Lch ! " $ Shield Ground Power Supply Ground Battery Data Bus Rch A & Sig Gnd Speakers ) ~ + , . ( / : % Green Green/Black Rear Left White White/Black Grey/Black Grey Violet/Black Violet Front Left Front Right Rear Right CD changer (Sold separately) Speakers ; Amplifier (Sold Separately) Rear or Subwoofers For details on how to set the Subwoofer to ON/OFF, see "Subwoofer On and Off" on page 5. 20-EN 1 ISO Antenna Convertor Plug 2 Audio Interrupt In Lead (Pink/Black) Connect this lead to the Audio Interface output of a cellular phone which provides ground shorting when a call is received. If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device. [. . . ]