User manual ALPINE CDM-9801

[. . . ] R EN CDM-9803 CDM-9801 FM/AM Compact Disc Receiver · OWNER'S MANUAL Please read before using this equipment. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. FR ES ES IT ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC. [. . . ] Press the BAND button repeatedly until the desired radio band is displayed. Each press changes the band: F1(FM1) F2(FM2) AM 3 3 Press the TUNE/A. ME button repeatedly until "DX SEEK" and "SEEK" disappear from the display. NOTE The initial mode is DX SEEK. 4 Press the g or f button to move downward or upward one step respectively until the desired station frequency is displayed. NOTE The ST indicator or STEREO indicator appears on the display when a Stereo FM station is tuned in. 8-EN Automatic Memory of Station Presets 1 2 3 Press the SOURCE/POWER button to select the radio mode. Press the BAND button repeatedly until the desired radio band is displayed. The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into presets 1 to 6 buttons in order of signal strength. When the automatic memory has been completed, the tuner goes to the station stored in the preset location No. 1. NOTE If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began. Tuning to Preset Stations 1 2 3 Press the SOURCE/POWER button to select the radio mode. Press the BAND button repeatedly until the desired band is displayed. Press the station Preset button that has your desired radio station in memory. The display shows the band, preset number and frequency of the station selected. 9-EN CD Player Operation Inserting/Ejecting Disc SOURCE/ POWER -/J Disc Select buttons (1 through 6) 1 c Insert a CD half way into the slot with the label side facing up. The player automatically draws the disc into the disc compartment. g f 4 5 6 The Disc indicator appears to show that a disc is loaded. NOTE Three-inch (8cm) CD's can be used. About the usable discs. Use only compact discs with the label side showing the CD logo marks below. 2 Press the c(Eject) button when you want to eject the CD. NOTES · If the CD is not removed for several seconds after it has been ejected, the player automatically draws the CD into the compartment to protect the CD. · Do not insert or remove a CD forcibly when loading or ejecting a CD, as malfunction may result. If you use unspecified compact discs, correct performance cannot be guaranteed. You can play CD-Rs (CD-Recordable)/CD-RWs (CDReWritable) which have been recorded only on audio devices. · Some of the following CDs may not play on this unit: Flawed CDs, CDs with fingerprints, CDs exposed to extreme temperatures or sunlight (e. g. , left in the car or this unit), CDs recorded under unstable conditions, CDs not designed for audio use, CDs on which a recording failed a re-recording was attempted, copyprotected CDs which do not conform to the audio CD industry standard. Normal Play and Pause 1 Insert a CD. The CD player begins playback from the first track on the disc. On handling Compact Discs (CD/CD-R/ CD-RW) · Do not touch the surface. · Do not expose the disc to direct sunlight. · Do not affix stickers or labels and do not write on the surface. · Clean the disc when it is dusty. · Make sure that there are no bumps around the disc. · Do not use commercially available disc accessories. The display shows the track number. When the last track is played back the player returns to the first track. [. . . ] ("Alpine"), are dedicated to quality craftsmanship and are pleased to offer this Warranty. Should you have any questions, please contact your Dealer or Alpine at one of the telephone numbers listed below. [PRODUCTS COVERED: This Warranty covers Car Audio/Visual Products and Related Accessories ("the product"). Products purchased in the Canada are covered only in the Canada. are covered only in the U. S. A. 2 You should provide a detailed description of the problem(s) for which service is required. [. . . ]