User manual ALPINE CRA-1667RF

[. . . ] R EN CRA-1667RF Changer/XMTM Radio Controller FR · OWNER'S MANUAL Please read before using this equipment. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. ES ES IT ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel. : (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. [. . . ] The first 10 seconds of each track will be played back in succession. To stop scanning, press the SCAN button and deactivate the Scan mode. Multi-Changer Selection Alpine's Ai-NET system will support up to 6 CD Changers. When operating two or more changers, the KCA-400C (Multi-Changer Switching device) must be used. If you use 1 Switching device, you can connect up to 4 CD Changers. If you use 2 Switching devices, you can connect up to 6 CD Changers. When using KCA-410C (Versatile Link Terminal), you can connect two changers and two external outputs (AUX). 1 2 3 Press the SOURCE button of the Remote Display or the Remote Control to activate the CD Changer mode. Press the BAND button on the Remote Control to activate the CD Changer Selection mode. Press the BAND button on the Remote Control until the desired changer indicator appears on the display. NOTE If the selected CD Changer is not connected, the display will show "NO CHG". 4 To operate the selected changer. NOTE For further details about the external input (AUX) when using KCA-410C, see "Setting the AUX Mode (V-Link)" on page 6. 9-EN MP3 Changer Operation (Optional) ) SOURCE SETUP Rotary encoder SOURCE FOLDER 3 g -/J M. I. X. SCAN ( 3 4 FOLDER 4 8 f 9 REPEAT SETUP Playing MP3 Files If you connect a changer applicable to MP3, you can play CD-ROMs, CD-Rs, and CD-RWs containing MP3 files on this unit. Fast Forward and Backward 1 Press the ( or ) button of the Remote Display, or press and hold the g or f button of the Remote Control to quickly move backward or forward until you reach the desired section of the file. 1 2 Press the SOURCE button of the Remote Display or the Remote Control to switch to the MP3 Changer mode. The mode will change every time the button is pressed. Press the 4 or 3 button of the Remote Display, or press the 8 or 9 button of the Remote Control until your desired disc number appears in the display. To pause playback, press the -/J button on the Remote Control. Pressing the -/J button again will resume playback. Note There is no audio output during fast forward/backward for MP3 files. Selecting Folders 1 Press the FOLDER 4 or FOLDER 3 button on the Remote Control to select the folder. File Search You can locate all the files on a disc and play them. NOTES · The unit can play discs containing both audio data and MP3 data. · The MP3 indicator is lit during MP3 playback. 1 2 Music Sensor (Skip) Press the rotary encoder for at least 2 seconds, or press the -/J button of the Remote Control for at least 2 seconds during playback. Turn the rotary encoder, or press the g or f button of the Remote Control to select the desired file. Then, if you press the rotary encoder, or press the -/J button of the Remote Control, the selected file starts to play. 1 Turn the rotary encoder to the left, or press the g button of the Remote Control once during CD play to return to the beginning of the current file. If you wish to access the beginning of a track further back, repeatedly press until you reach the desired file. Turn the rotary encoder to the right, or press the f button of the Remote Control once to advance to the beginning of the next file. If you wish to access the beginning of a track further ahead, press repeatedly until the desired file is reached. NOTE File Search Mode is automatically canceled if no buttons are pressed within 5 seconds. NOTES · The music sensor feature is functional in the play or pause mode. · Files are played back in their pathname order which was used when they were written to the CD. 10-EN Repeat Play 1 Press the REPEAT button of the Remote Control to play back repeatedly the file being played. The RPT ALL mode is selected, the unit repeatedly plays back all files on the disc selected. RPT RPT ALL (off) Press the REPEAT button of the Remote Control and select OFF to deactivate the repeat play. Setting the Range of MP3 File Selection You can set the range of MP3 file selection to "entire disc contents" or "folder contents only. " 1 In the MP3 Changer mode, press the rotary encoder of the Remote Display to switch to MP3 DISC or MP3 FLDR. TIPS You can also set the range in the SETUP mode. [. . . ] ("Alpine"), are dedicated to quality craftsmanship and are pleased to offer this Warranty. Should you have any questions, please contact your Dealer or Alpine at one of the telephone numbers listed below. [PRODUCTS COVERED: This Warranty covers Car Audio/Visual Products and Related Accessories ("the product"). Products purchased in the Canada are covered only in the Canada. are covered only in the U. S. A. 2 You should provide a detailed description of the problem(s) for which service is required. [. . . ]