User manual ALPINE CVA-1003RR

[. . . ] Please read this GUIDE FOR INSTALLATION AND CONNECTIONS and the OWNER'S MANUAL thoroughly to familiarize yourself with each control and function. We at ALPINE hope that your new DVA5205P will give you many years of listening enjoyment. In case of problems when installing your unit, please contact your authorized ALPINE dealer. When using a monitor with a built-in remote control sensor, such as the CVA-1000R, the external sensor is not used. [. . . ] Attach two pieces of Velcro fastener 9 with the rough side facing toward the DVD unit. Put on two pieces of Velcro fastener 9 on the mounting positions. Put on two pieces of the Velcro fastener (soft one) 9 on the mounting positions and mount the unit. IMPORTANT Please record the serial number of your unit in the space provided on the back cover of Owner's Manual and keep it as a permanent record. The serial number plate is located on the bottom of the unit. Be sure to disconnect the cable from the (­) battery post before installing your DVA-5205P. This will reduce any chance of damage to the unit in case of a short-circuit. Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage the vehicle's electrical system. When making connections to the car's electrical system, be aware of the factory installed components (e. Do not tap into these leads to provide power for this unit. When connecting the DVA-5205P to the fuse box, make sure the fuse for the intended circuit of the DVA-5205P has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your ALPINE dealer. Mount the brackets 1 at both sides of the unit with screws with double washer (M5x10) 3. Attach the unit securely with hex bolts (M6x50) 4, flanged hex nut (M6) 7, spring washers (M6) 6, and wing nuts (M6) 8. 4 Hex bolt (M6x50)/ 5 Flanged self-tapping 6 Spring washer 8 Wing nut (M6)/ 9 Velcro fastener/ p Mounting sleeve/ 7 Flanged head hex nut Boulon à six pans screw (M5x15)/Vis (M6)/Rondelle à Ecrou à oreilles Fermeture Velcro/ Gaine de montage/ (M6)/Ecrou hexagonal à (M6x50)/Perno autotaraudée à ressort (M6)/ (M6)/Tuerca de Cremallera Velcro Manguito de montaje tête à embase (M6)/ hexagonal (M6x50) embase (M5x15)/ Arandela de mariposa (M6) Tuerca hexagonal de Tornillo autorroscante resorte (M6) cabeza embridada (M6) embridado (M5x15) Mount the brackets 1 at both sides of the unit with screws with double washer (M5x10) 3. Park the vehicle in a safe and level location. Mount the unit on the floor with flanged selftapping screws (M5x15) 5 and spring washers (M6) 6. Warning: Do not damage pipe or wiring when drilling holes. 1 Switched Power Lead (Ignition) (Red) Connect this lead to an open terminal on the vehicle's fuse box or another unused power source which provides (+) 12V only when the ignition is turned on or in the accessory position. When connecting with the Ai-NET compatible AV head unit or the Ai-NET compatible head unit, do not connect the ignition lead. [. . . ] D RCA Extension Cable (Sold separately) f AUX Audio Input (AUX1) Terminal Connect audio output lead of a DVA-5205P to this terminal. Mount the brackets 1 at both sides of the unit with screws with double washer (M5x10) 3. Cut the carpet in "x" shape with a cutter and insert the floor base 2 from under side of the carpet. Mount the unit on the carpet with spring washer (M6) 6 and wing nuts (M6) 8. [. . . ]