User manual ALPINE HCE-C157D

[. . . ] Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure. CONNECT LEADS PROPERLY Be sure to connect the colour coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or cause damage to the vehicle’s electrical system. [. . . ] When connecting the device to the fuse box, make sure the fuse for the intended circuit of the device has the appropriate amperage. Failure to do so may result in fire or damage to the unit and/or the vehicle. When in doubt, consult your Alpine dealer. uSE THIS PRODUCT FOR MOBILE 12 VOLT APPLICATIONS. Use for other than its designed application may result in fire, electric shock or other injury. € • NOTICE • About Care of Device Do not assert any excess pressure to the camera or the mounting, as this could cause the camera direction to shift, or the camera mounting bracket to come off. To prevent the camera lens, mounting and cords from changing colour or shape, or from deteriorating, wipe with a chemical-free, damp cloth. When washing the car, do not using an automatic car washer, or highpressure washer. Doing so could cause the camera to come off, damage to the device cord, or may allow water to enter the camera or the inside of the car. In some cases, to attach the device, a hole must be drilled in the car body, requiring use of touch-up paint (retail product) for rust-prevention, and should be prepared beforehand. Be sure to disconnect the cable from the (–) battery post before installing your HCE-C157D. This will reduce any chance of damage to the unit in case of a short-circuit. Be sure to connect the colour coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle’s electrical system. When making connections to the vehicle’s electrical system, be aware of the factory installed components (e. Do not tap into these leads to provide power for this unit. When connecting the HCE-C157D to the fuse box, make sure the fuse for the intended circuit of the HCE-C157D has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your Alpine dealer. About Rear Camera The rear camera of this camera system is a dedicated product. Do not use mobile phones and wireless devices near the camera. Doing so may result in noise on the screen or malfunction. [. . . ] For information on HCE-C157D-compatible products, contact your local authorized Alpine dealer or visit the Alpine Website. ** Connect the water-proof connector for the camera and camera extension cable securely. When disconnecting the water-proof connector, use a flat-blade screwdriver. 5m) B B B B B Camera mounting bracket Support de fixation Soporte de la cámara Kameramontagehalterung Supporto di montaggio della videocamera B Monteringshållare till kamera B 攝像頭安裝架 C C C C C C C Hex screw Vis hexagonale Tornillo hexagonal Inbus-Schraube Vite a testa esagonale Insexskruv 六⾓螺絲 D D D D D D D Hexagonal wrench Clé 6 pans Llave hexagonal Inbus-Schraubenschlüssel Chiave esagonale Insexnyckel 六⾓扳⼿ 1 Fissare la telecamera A alla staffa del supporto B utilizzando le viti a testa esagonale C (Fig. [. . . ]