User manual ALPINE IVA-D100RB

[. . . ] FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE/PARA USO EN AUTOMÓVILES/SOLO PER L'UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK R Mobile Media Station EN IVA-D100R IVA-D100RB TM DE DIGITAL VIDEO FR · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] Make a note of the current settings before making changes. The settings are cleared even when the vehicle's battery is disconnected. As for the country number, refer to "List of Country Codes" (pages 57, 58). 4 Touch [ENT] to memorize the code. · To change parental level and play, touch [YES]. When [YES] is touched, the numeric keypad input screen is displayed. Input the 4-digit password in "Setting the Rating Level (Parental Lock)" you set, then touch [ENT]. · To play without changing the parental level, touch [NO]. (When [NO] is touched, playback will be at the parental level set in "Setting the Rating Level (Parental Lock). ") Setting the Rating Level (Parental Lock) This function can help restrict the viewing of movies to children of appropriate age levels only. Setting item: PARENTAL Setting content: INPUT Changing the Digital Output Setting Use the following procedure to set the digital audio signal output from the IVA-D100R/IVA-D100RB. Setting item: DIGITAL OUT Setting contents: BITSTREAM / LPCM BITSTREAM: The digital output is switched automatically according to the type of audio signals being played. Be sure to select "BITSTREAM" when you want to connect a digital audio processor and play Dolby Digital audio. "BITSTREAM" is the factory setting. LPCM: The audio signals recorded on the disc are converted to 48 kHz/16 bit (for DVDs) or 44. 1 kHz (for video CDs and CDs) linear PCM audio signals for output. · When the settings are changed, the old settings are overwritten. Make a note of the current settings before making changes. The memory is cleared when the vehicle's battery is disconnected. · On unrated DVDs, playback will not be restricted even if the rating level is set. · If you want to play back DVD software with the parental lock feature and its use is currently restricted, change the rating level and the country number in order to play back the DVD. · Once set, this rating level remains in memory until changed. To enable playback of discs of higher rating levels or to cancel the parental lock, the setting must be changed. · Not all DVDs provide a Parental Lock feature. If you are unsure about a DVD, play it first to confirm. Do not leave DVDs accessible to young children for whom you deem them inappropriate. 31-EN Audio output/Optical digital audio output Disc Format LPCM (CD-DA, DVD-V, DVDA, DVD-VR) PPCM (DVD-A) Audio recording format Fs 44. 1/176. 4kHz 48/96/192kHz 44. 1/88. 2/ 176. 4kHz 48/96/192kHz Q 16/20/24bit 16/20/24bit 16/20/24bit 16/20/24bit 16/18/20bit Digital output setting (DVD SETUP) BITSTREAM or LPCM BITSTREAM or LPCM BITSTREAM or LPCM Optical digital audio output 44. 1kHz, 16bit, LPCM 2ch (2ch Downmix)* 48kHz, 16bit, LPCM 2ch (2ch Downmix)* Not output Analog audio output (Ai-NET, RCA output) OK OK OK Dolby Digital (-EX) (DVD-V, DVDA, DVD-VR) DTS (-ES) (CD-DA, DVD-V, DVDA) 48kHz LPCM BITSTREAM 48kHz, 16bit, Decoded 2ch (2chDownmix)* Bit stream (Max 7. 1ch)* 44. 1kHz, 16bit Decoded 2ch (2chDownmix)* Bit stream (Max 6. 1ch)* 48kHz, 16bit, Decoded 2ch (2chDownmix)* Bit stream (Max 6. 1ch)* 44. 1kHz, 16bit, Decoded 2ch* Bit stream* 48kHz, 16bit, Decoded 2ch (2chDownmix)* Bit stream (Max 5. 1ch)* 44. 1kHz, 16bit, Decoded 2ch* Bit stream* 48kHz, 16bit, Decoded 2ch (2chDownmix)* Bit stream (Max 5. 1ch)* 32kHz, 16bit, Decoded 2ch 44. 1kHz, 16bit, Decoded 2ch 48kHz, 16bit, Decoded 2ch OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK 44. 1kHz 16/20/24bit LPCM BITSTREAM 48/96kHz 16/20/24bit LPCM BITSTREAM MPEG1Layer II (VCD, DVD-V, DVD-A, DVDVR) 44. 1kHz 16bit LPCM BITSTREAM 48kHz 16bit LPCM BITSTREAM MPEG2Layer II (DVD-V, DVDA, DVD-VR) 44. 1kHz 16bit LPCM BITSTREAM 48kHz 16bit LPCM BITSTREAM MPEG1/2/ 2. 5Layer III (MP3, WMA) 32kHz 44. 1kHz 48kHz 16bit 16bit 16bit BITSTREAM or LPCM BITSTREAM or LPCM BITSTREAM or LPCM * Not output when playing back a DVD-Audio. 32-EN Setting the Downmix Mode This function applies to Dolby Digital, DTS stream sound. Setting item: DOWNMIX MODE Setting contents: SURROUND / STEREO SURROUND: Surround compatible Downmix STEREO: Stereo Downmix Setting of the Bonus Code Some DVD-Audio discs include bonus group. The 4 digit code for the bonus group can be memorized. Refer to the information on the jacket, etc. , of the disc, for the code number. Setting item: BONUS CODE Setting contents: INPUT Setting the TV Screen Setting Use the procedure described below to modify the output screen according to the type of TV monitor (rear monitor) being used. [. . . ] · Be sure to turn the power off to the unit before changing the switch position. Digital Output Terminal Ai-NET Connector Connect this to the output or input connector of other product equipped with Ai-NET. AUX Video Input Connector (AUX INPUT) Connect the video output lead of a DVD video player or DVD changer to this terminal. RCA Extension Cable (Included with DVD video player) Ai-NET Cable (Included with DVD video player) Fiber optic Cable (Sold Separately) Ai-NET Cable (Included with Audio Processor) Ai-NET Cable (Included with CD Changer) Remote Control Output Lead (White/Brown) Connect this lead to the remote control input lead. This lead outputs the controlling signals from the remote control. To Ai-NET Connector (Grey) To Ai-NET Connector (Black) 72-EN When Connecting External Equipment (Yellow) Rear monitor (Sold Separately) To Video Input terminal <Monitor unit> To Video Output terminal Back-up camera (Sold Separately) (Yellow) (Orange/White) REVERSE Use only when back-up camera is connected. System Switch When connecting an equalizer or divider using Ai-NET feature, place this switch in the EQ position. When no device is connected, leave the switch in the Ai position. · Be sure to turn the power off to the unit before changing the switch position. AUX Video Output Connector Use when connecting an optional monitor etc. RCA Extension Cable (Sold separately) Reverse Lead (Orange/White) Connect to the plus side of the car's reverse lamp which lights when the transmission is shifted into reverse (R). [. . . ]