User manual ALPINE IVA-W505R

[. . . ] FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN AUTOMÓVILES/SOLO PER L'UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/ /DO UYCIA TYLKO W SAMOCHODZIE/ R EN Mobile Media Station IVA-W505R IVA-W502R DIGITAL VIDEO DE FR ES · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] Scroll display is done once as a track is changed. Scroll display is repeated as long as the mode is turned on. Setting items: CLOCK / CLOCK ADJUST / DAYLIGHT SAVING TIME / DEMONSTRATION / BEEP / AUTO SCROLL / LANGUAGE SELECT / LED DIMMER LEVEL 4 Touch [ ] to return to the previous screen. Touch and hold [ ] for at least 2 seconds to return to the main source screen that was displayed before the setup operation was started. · Immediately after changing the settings of General Mode (While the system is writing data automatically) do not turn the ignition key (engine key) to OFF. Otherwise, the settings may not be changed. · The display scrolls on the unit when the screen is filled up. · Song, artist and album name, etc. scrolls when an iPod is connected. Displaying the Time The clock indication on the monitor display is turned on or off respectively. Setting item: CLOCK Setting contents: OFF / ON Switching to the Russian Font Two types of font can be selected. Setting item: LANGUAGE SELECT Setting contents: MODE1 / MODE2 / MODE3 MODE1: Normal Font Display (ISO8859-1). MODE2: Russian Font Display (WINDOWS-1251) You cannot use this font for display in RDS, Tuner mode. MODE3: European Font Display (WINDOWS-1252) Setting the Time Setting item: CLOCK ADJUST Further setting items : HOUR / MINUTE / TIME ADJUST Setting contents: 0-23 / 0-59 / RESET HOUR: Adjust the hour. RESET: If the clock shows less than 30 minutes past, the minute will be ": 0"; more than 30, the hour advances. Adjusting the Dimmer of Button Lighting at Night You can adjust the brightness of the button lighting at night with the dimmer. Setting item: LED DIMMER LEVEL Setting level: -2 to +2 · The clock-adjusting mode is cancelled when the power is turned off, when [ ] or [ESC] is touched. · Clock adjustment can be made when "RDS Time Display" (page 35 ) is set to OFF. Setting Daylight Saving Time Setting item: DAYLIGHT SAVING TIME Setting contents: OFF / ON OFF: Return to the ordinary time. The time advances by one hour. 38-EN SYSTEM Setup System Setup Operation The Parking Brake must be engaged to access the SYSTEM mode screen. Attempting to access this screen while driving will display the warning-CAN'T OPERATE WHILE DRIVING. Setting the External Device Interrupt Mode If an Alpine Ai-NET Interrupt Box (NVE-K200) is connected to the IVA-W505R/IVA-W502R, an Auxiliary Source will be allowed to interrupt the current audio source. For example, you can listen to the voice guidance of your navigation system when it occurs even while you are playing a CD or DVD. The CD/DVD player will be automatically muted during voice guidance. For further details, please refer to the manual for NVE-K200. Setting item: IN INT. MUTE Setting contents: OFF / ON The following steps 1 to 4 are common operations to each "Setting item" of SYSTEM Setup. Refer to each section for details. OFF: The volume level can be adjusted in Interrupt mode. The icon that is set in "Setting the Interrupt Icon Display" is displayed. 1 2 3 Touch [SETUP] on the main source screen. The SETUP selection screen is displayed. · The auxiliary device being connected must have an Interrupt wire with a negative trigger for this function to operate automatically. Otherwise, a separate switch needs to be added to switch it manually. Touch [SYSTEM SETUP]. The SYSTEM SETUP screen appears. Setting the Interrupt Icon Display The unit can display the icon of an external device, such as a telephone, whenever a phone call comes in to tell you there is a phone call. Setting item: IN INT. ICON Setting contents: INT / TEL INT: The INT icon appears on the display. TEL: When the external device (telephone) sends the interrupt signal, the telephone icon appears on the display. Touch [ ] or [ ] etc. , of the desired item to change its setting. Setting items: IN INT. ICON / REMOTE SENSOR*2 / CAMERA IN / NAV. [. . . ] Connect this to an iPod or an optional Bluetooth Box, using the FULL SPEEDTM Connection Cable (KCE-422i) (sold separately). To use a hands-free mobile phone, an optional Bluetooth Box connection is required. For details on connection, refer to the Owner's Manual of the Bluetooth Box. Audio Interrupt In Lead (Pink/Black) Parking Brake Lead (Yellow/Blue) Connect this lead to the power supply side of the parking brake switch to transmit the parking brake status signals to the IVA-W505R/IVA-W502R. 80-EN ISO Power Supply Connector Switched Power Lead (Ignition) (Red) Connect this lead to an open terminal on the vehicle's fuse box or another unused power source which provides (+) 12V only when the ignition is turned on or in the accessory position. Battery Lead (Yellow) Connect this lead to the positive (+) post of the vehicle's battery. Fuse Holder (10A) Ground Lead (Black) Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided. Right Front (+) Speaker Output Lead (Grey) Right Front (­) Speaker Output Lead (Grey/Black) Right Rear (­) Speaker Output Lead (Violet/Black) Right Rear (+) Speaker Output Lead (Violet) Left Rear (+) Speaker Output Lead (Green) Left Rear (­) Speaker Output Lead (Green/Black) Left Front (­) Speaker Output Lead (White/Black) Left Front (+) Speaker Output Lead (White) RCA Output/Input Connector iPod AUDIO/VIDEO Input Connector Connect this to the AV extension cable. MIC Input Connector (IVA-W505R only) To Microphone (sold separately). USB extension cable (Included) AV extension cable (Included) USB 30P cable (Included) ISO/JASO Antenna Adapter (Sold Separately) ISO/JASO Antenna Adaptor may be required, depending on the vehicle. ISO Connector (Speaker Output) Vehicle Display Interface Connector Outputs Vehicle Display Interface control signals. [. . . ]