User manual ALPINE IVE-W530E

[. . . ] ENGLISH Contents Operating Instructions WARNING WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Discs Playable on This Unit . . . . . . . . . . . . . . . . . . . [. . . ] is touched, a DivX® file registered code or deactivate code is displayed. • During DISC/USB/iPod playing mode, the above information will not be displayed. 25-EN Source Setup Source Setup Operation The Parking Brake must be engaged to access the Source mode screen. Attempting to access this screen while driving will display the warning-Can’t operate while driving. Display Setup Display Setup Operation The Parking Brake must be engaged to access the Display mode screen. Attempting to access this screen while driving will display the warning-Can’t operate while driving. The following steps 1 to 5 are common operations to each “Setting item” of Radio Setup. Refer to each section for details. The following steps 1 to 4 are common operations to each “Setting item” of Display Setup. Refer to each section for details. 1 2 3 Touch [ ] on the main screen. The SETUP selection screen is displayed. 1 2 3 Touch [ ] on the main screen. Touch the title bar of Source Setup. The SOURCE SETUP screen appears. The SETUP selection screen is displayed. Touch the title bar of Display Setup. The Display Setup screen appears. Touch the title bar of your desired Setup mode. DVD Setup*1/Radio Setup/BLUETOOTH Setup*2 *1 Refer to “DVD Setup” on page 24. *2 Displayed when “BLUETOOTH IN” Touch [ ] or [ ] etc. , of the desired item to change its setting. is set to other than “OFF” (page 32). (IVE-W530EBT/IVE-W530ABT only) 4 Touch [ ], [ ] or the title bar, etc. of the desired item to change its setting. Setting items: Visual EQ*1 / Dimmer / Screen Dimmer Level*2 / Function Guide Fade / Base Color / Screen Alignment / Visual Key *1 For details, refer to “Visual EQ Setting Operation” on page 27. *2 Not displayed when “Dimmer” is set to “OFF”. Radio Setup: FM Level BLUETOOTH Setup: (IVE-W530EBT/IVE-W530ABT only) Paired Devices / Device Search / Clear Device / Service Provider / Visible Mode / Auto Answer / Speaker Select / MIC Input / Firmware Version / Firmware Update / BT Menu Language / Shortcut Memory 4 Touch [ ] to return to the previous screen. • For BLUETOOTH Setup details, refer to “BLUETOOTH Setup” (page 33). • Touching [Exit] will turn off the Display Setup screen, and return to previous main screen. • Immediately after changing the settings of Display Mode (While the system is writing data automatically) do not turn the ignition key (engine key) to OFF. Otherwise, the settings may not be changed. 5 Touch [ ] to return to the previous screen. Setting the Brightness of the Backlighting Backlighting is provided by a fluorescent light built into the liquid crystal panel. The illumination control adjusts the brightness of the backlighting based on the car ambient lighting for easier viewing. Setting item: Dimmer Setting content: Auto / ON / OFF Auto: Adjust the brightness of the background illumination of the monitor automatically to the brightness of the car interior. Keep the background illumination of the monitor dark. Deactivate Auto Dimmer mode to keep the background illumination of the monitor bright. Radio Setup “Radio Setup” is selected on the source setup main menu in step 3. Adjusting Source Signal Levels If the difference in volume level between the CD and FM radio is too great, adjust the FM signal level as follows. Setting item: FM Level Setting content: Low / High ON: OFF: • When ON or Auto is set, the setting is also applied for the button lighting in “Adjusting the Dimmer of Button Lighting at Night” (page 30). 26-EN Adjusting the Minimum Level of Backlight You can adjust the brightness of the backlight (LOW). This function could be used, for instance, to change the screen brightness while travelling at night. Setting item: Screen Dimmer Level Setting content: –15 to +15 Visual EQ™ Visual EQ Setting Operation The following steps 1 to 4 are common operations to each “Setting item” of Visual EQ setting. Refer to each section for details You can adjust the level between MIN (-15) and MAX (+15). When it reaches the minimum or maximum point, the display shows “MIN” or “MAX” respectively. Turn the Function Guide ON/OFF (Function Guide Fade) By setting to ON, the function guide will be hidden if no operation is performed for 5 seconds in Radio source, USB source, etc. To display the function guide, touch the screen slightly. Setting item: Function Guide Fade Setting contents: OFF/ON 1 2 After steps 1 and 2 in “Display Setup Operation” (page 26) have been performed, touch the title bar of Visual EQ. Visual EQ screen appears. Select a desired setting item by touching [ ] or [ ]. Tint* Contrast Setting items: Visual EQ* Bright Color* Sharp* User Memory* • In DVD play mode, the function guide will be hidden if there is no operation for 5 seconds even if you set OFF. * The setting is available in the visual source mode (except navigation screen). Switching the Font Background Colour You can choose from 4 different colours for the font background. Setting item: Base Color Setting contents: Blue/Red/Green/Amber 3 4 Change the setting on the selected item by touching its [ ] or [ ]. Touch [ ] to return to the previous screen. Adjusting the Touch Panel Adjustment becomes necessary when the display position on the LCD and the touch position on the touch panel do not match. Setting item: Screen Alignment Setting content: / Reset • Touching [Exit] will turn off the Display Setup screen, and return to previous main screen. • Only one setting item can be displayed on each page, you can select the desired brightness, picture tint, etc. through the screen shown. 1 Touch the title bar of Screen Alignment. [. . . ] To use an iPod/iPhone, an iPod interface cable is required. If a USB cable other than the supplied is used, correct performance cannot be guaranteed. • Route the USB cable away from other cables. RCA Extension Cable (sold separately) Fuse Holder (15A) Power Supply Connector Remote Turn-On Lead (Blue/White) Connect this lead to the remote turn-on lead of your amplifier or signal processor. MIC Input Connector (IVE-W530EBT/IVE-W530ABT only) To Microphone Power Antenna Lead (Blue) Connect this lead to the +B terminal of your power antenna, if applicable. • This lead should be used only for controlling the vehicle’s power antenna. [. . . ]