Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ALPINE KTC-211PW. We hope that this ALPINE KTC-211PW user guide will be useful to you.
Lastmanuals help download the user guide ALPINE KTC-211PW.
Detailed instructions for use are in the User's Guide.
[. . . ] Use extreme care when cutting headliner material. Check for wiring or other componentry above headliner material. Materials / Tools required for this installation: 1. Powered screwdriver or drill with adapter 3. [. . . ] Use rubbing alcohol to clean sheet metal in rear area of headliner cut out. Remove protective backing from adhesive strips on rear mounting bracket ( item 7 pg 2) and position tab 18 1/4" from rear edge ofPHOTO 5 front mounting bracket. Make sure bracket is centered left to right and firmly press against roof. jumper harness that will connect the vehicle's dome light wires to the lights in LCD monitor housing. Refer to wiring/connections section of the TMX-680A owner's manual for details. Using a test light, test function of lights.
10. Install and route all video and audio cables, and any PHOTO 6 other added component requirements to their respective places in the vehicle. Refer to component installation instructions for wiring diagrams. The suggested routing of the video system cable is as follows: Above the headliner from video system to B-pillar.
5
Down the B-pillar to the floor. Route the power lead to an accessory controlled source. Connect the ground lead to the vehicle chassis. Route the remaining wiring to the VCP location. Connect per instructions included with the video system.
III. A/C control head in console (item 8 pg 2). Remove protective backing from adhesive strips on PHOTO 7 mounting brackets (item 9 pg 2 ) and press firmly against control head as shown. INSTALLATION OF CONSOLE
.
Caution: Use extra support for the console until secured to the vehicle. Failure to do so may cause damage to console or installed components.
PHOTO 8
12. Install dome light switch (item 10 pg 2) into opening on front of console. Raise console into approximate position and connect A/C control wires. Insert bracket on rear of console into rear mounting bracket (item 7 pg 2) and slide rearward. [. . . ] Secure using (4) four 8-32 x 1 1/4" screws (item 3 pg. 2). Raise LCD monitor panel into locked position.
PHOTO 10
18. Cut Velcro tape (item 4 pg 2) into 2" pieces. Remove protective backing from tape and apply to remote controls. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ALPINE KTC-211PW
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ALPINE KTC-211PW will begin.
