User manual ALPINE PKG-850P

[. . . ] R EN PKG-850P Rear Seat Entertainment Package Système de divertissement pour les sièges arrière Paquete de entretenimiento para asientos traseros Entertainment-Paket für den Rücksitz Sistema di intrattenimento per sedili posteriori Underhållningspaket för baksäte · OWNER'S MANUAL Please read before using this equipment. MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. · BEDIENUNGSANLEITUNG Bitte vor Gebrauch des Gerätes lesen. [. . . ] Brightness can be adjusted from ­15 (MIN) to +15 (MAX). 4 Press ENT to finish adjustments or wait 10 seconds until OSD disappears; the adjustment will be saved automatically. Adjusting Contrast 2 3 4 Press the ENT button to finish adjustments or wait 10 seconds until OSD disappears; the adjustment will be saved automatically. Press or and select CONTRAST. Press or to adjust the contrast. Contrast can be adjusted from ­15 (LOW) to +15 (HIGH). 4 Press ENT to finish adjustments or wait 10 seconds until OSD disappears; the adjustment will be saved automatically. 6-EN PKG-850P_EN. indd 6 07. 12. 2006 11:57:44 Uhr Adjusting Sharpness 2 3 1 2 Press or and select SHARPNESS. Press and hold SELECT for at least 2 seconds to show the SETUP menu. Press SELECT to switch to DISP MODE from PICTURE. To change each mode, press or . Press or to adjust the screen quality. Screen quality can be adjusted from -15 (SOFT) to +15 (HARD). 4 Press ENT to finish adjustments or wait 10 seconds until OSD disappears; the adjustment will be saved automatically. Each press changes the display modes as follows: Resetting the Picture Adjustment 2 Press or and select RESET. WIDE Normal images are expanded uniformly in the horizontal direction and are displayed over the entire screen. Press ENT to reset the picture adjustments. · If you do not press ENT within 10 seconds, OSD disappears and the reset adjustments will not be saved. 3 Switching Display Modes Display mode on the screen can be adjusted to Wide, Zoom, Cinema and Normal. · Each source can be adjustable individually. · Adjusting should be made within 10 seconds, otherwise OSD (On Screen Display) will be automatically turned off. SELECT ZOOM Normal images are expanded in the horizontal direction and are displayed over the entire screen. The expansion ratio increases towards the right and left edges of the screen. CINEMA Normal images are expanded in the horizontal and vertical directions. The top and bottom of the image are cut off. This mode is suited for 16:9 cinema size images. Front Panel Controls NORMAL Normal image (4:3) SELECT 3 Press the ENT button to finish adjustments or wait 10 seconds until OSD disappears; the adjustment will be saved automatically. Remote Control 7-EN PKG-850P_EN. indd 7 07. 12. 2006 11:57:47 Uhr VISUAL EQ Operation You can select a mode suitable for the subject image. · Each source can be adjusted individually. · Adjusting should be made within 10 seconds, otherwise OSD (On Screen Display) will be automatically turned off. DIMMER 3 Press ENT to finish adjustments or wait 10 seconds until OSD disappears; the adjustment will be saved automatically. Front Panel Controls DIMMER Remote Control 1 2 Press and hold DIMMER for at least 2 seconds to show the VISUAL EQ OSD. To change VISUAL EQ, press DIMMER or press or to cycle through the OSD as FLAT, NIGHT MOVIE, SOFT, SHARP, HIGHT CONT, and FLAT. (Default: SHARP) VISUAL EQ mode (manufacturer's settings) selection (VISUAL EQ MODE) FLAT: Normal Setting (Visual EQ OFF) NIGHT MOVIE: Suitable for movies in which dark scenes frequently appear. SOFT: Suitable for CGs and animated movies. SHARP: Suitable for old movies where images are not clearly shown. · "FLAT" will change to "CUSTOM", when any of the picture modes (Brightness, Color, Tint, Contrast and Sharpness) has been adjusted. · NIGHT MOVIE, SOFT, SHARP and CONTRAST picture mode is changed, they automatically change to CUSTOM mode. · To return FLAT mode, press RESET on the picture mode, or change values of BRIGHT, COLOR, TINT, CONTRAST and SHARPNESS to 0 manually. 8-EN PKG-850P_EN. indd 8 07. 12. 2006 11:57:47 Uhr System Setup Operation IR transmitter, source names and Audio levels can be adjusted for all available sources. · Once this adjustment is made, all sources are affected. SELECT ENT AUDIO LEVEL 2 (Setting for Aux2): Press and to select HIGH/MID/LOW. (Default: HIGH) FACTORY DEFAULT: Press ENT Key, the system changes to Factory Default System Setting. [. . . ] Do not tap into these leads to provide power for this unit. When connecting the TMX-R850 to the fuse box, make sure the fuse for the intended circuit of the TMX-R850 has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your ALPINE dealer. [. . . ]