User manual ALPINE TME-M860

[. . . ] FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE/PARA USO EN AUTOMÓVILES/SOLO PER L'UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK R EN TME-M860 8. 0-INCH TOUCH PANEL WIDE VGA MONITOR · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] Refer to each section for details Selecting the VISUAL EQ Mode (Maker's setting) You can select a mode suitable for the subject image. Setting item: VISUAL EQ MODE Setting contents: OFF / NIGHT M / SOFT / SHARP / CONTRAST / P-1 / P-2 Initial Setting Suitable for movies in which dark scenes frequently appear. SOFT: Suitable for CGs and animated films. SHARP: Suitable for old movies where images are not clearly shown. P-1: Recalls the VISUAL EQ mode being stored on preset No. P-1 from "Storing VISUAL EQ" (page 8). P-2: Recalls the VISUAL EQ mode being saved on preset No. P-2 from "Storing VISUAL EQ" (page 8). OFF: NIGHT M: 1 2 Press and hold SOURCE for at least 2 seconds. The SETUP selection screen is displayed. Touch [Visual EQ]. VISUAL EQ screen appears. · To return to the initial setting, after selecting any one of the setting contents (NIGHT M to CONTRAST) and adjusting a desired brightness, picture tint, etc. , set this function to OFF. · If your desired brightness, picture tint, etc. , are adjusted after selecting any one of the setting contents, "CUSTOM" is displayed. 3 Storing VISUAL EQ Select a desired setting item by touching [ TINT* CONTRAST USER MEMORY* ] or [ SHARP* ]. Setting items: BRIGHT COLOR* VISUAL EQ MODE* You can store the settings made for "Adjusting Image Brightness, Tint, Depth, Picture Quality and Contrast. " Setting item: USER MEMORY Setting contents: P-1 / P-2 * The setting is available in the visual source mode. (except RGB navigation screen) 4 5 Change the setting on the selected item by touching its [ ] or [ ]. Touch [RETURN] to return to the normal screen. · Visual EQ setting cannot be made in the CAMERA mode. 1 After completing "Adjusting Image Brightness, Tint, Depth, Picture Quality, and Contrast" (pages 8, 9), touch [ ] or [ ] of USER MEMORY and then select preset number "P-1" or "P-2" to which the settings are to be stored. 2 After selecting a preset No. , touch [WRITE]. The adjusted VISUAL EQ mode is stored by the above operations. · You can recall the VISUAL EQ mode stored here from P-1 or P-2 of "Selecting the VISUAL EQ Mode (Maker's setting)" (page 8). Adjusting Brightness Setting item: BRIGHT Setting contents: -15 ~ +15 You can adjust the brightness between MIN (­15) and MAX (+15). When it reaches the minimum or maximum point, the display shows "MIN" or "MAX" respectively. · The brightness is automatically adjusted according to the car's interior brightness if AUTO is set in "Setting the Brightness of the Backlighting" (page 6). 8-EN Adjusting Colour of Picture Setting item: COLOR Setting contents: -15 ~ +15 You can adjust the colour between MIN (­15) and MAX (+15). When it reaches the minimum or maximum point, the display shows "MIN" or "MAX" respectively. · Tint adjustment cannot be made in NAV mode (with the RGB feature connected). Navigation System (Optional) Switching the Navigation Screen (Optional) If an optional Alpine Navigation System is connected to the TMEM860, the Navigation screen can be displayed on this unit. Adjusting Tint of Picture Setting item: TINT Setting contents: G15 ~ R15 Adjust the colour from G15 to R15. "G MAX" or "R MAX" is displayed at the maximum of each colour. · Tint adjustment cannot be made in NAV mode (with the RGB feature connected). · When PAL signal is input, you cannot adjust the TINT. 1 2 Touch [SOURCE] on the main source screen. The source selection screen appears on the display. Touch [NAV. ]. The Navigation screen is displayed. The operation is possible with the supplied navigation remote control. For navigation operation, refer to the Owner's Manual of the navigator. Adjusting Image Contrast Setting item: CONTRAST Setting contents: -15 to +15 Adjustment of contrast is done in the range of LOW (-15) to HIGH (+15). "HIGH" and "LOW" appear as the maximum and minimum values specified. [. . . ] · Do not apply force to the mount, or expose to humidity, within 24 hours after attaching. · If the mount is not firmly stuck, then we recommend that you attach with the supplied fixing screws. 6 Attach the main unit to the stand as shown in step 2. Use the cable clamps to fix the cables. · Before using, check that the main unit and the stand, and the stand and the place where it is attached to the car are fixed securely. · Locate the unit and route the leads at least 10 cm away from the car harness. · Keep the battery power leads as far away from other leads as possible. [. . . ]