User manual ALPINE TMI-M990

[. . . ] 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U. S. A. Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. 7300 Warden Ave. , Suite 203, Markham, Ontario L3R 9Z6, Canada Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF AUSTRALIA PTY. [. . . ] (See page 29) (See page 29) Rear monitor 1 (AUX OUT1), Rear monitor 2 (AUX OUT2) status display. (See page 28) 27-EN Other Useful Features Rear Entertainment function The Rear Entertainment function independently routes different sources to the front and the rear of the car. For example, while listening to the radio or other audio source in the front, DVD can be enjoyed in the rear with the optional rear monitor and headphones. Setting item: AUX OUT1, AUX OUT2 AUX OUT1*1: Select the source, from the list below, that is output to AUX OUT1. AUX OUT2: Select the source, from the list below, that is output to AUX OUT2. Setting content: LINK, NAVI. , AUX-1, AUX-2, AUX-3, DVD LINK: The picture and sound being shown on the TMI-M990 is output to the rear monitor. NAVI. : The picture and sound from the Navigation is output to the rear monitor. (Only when the Navigation is connected) AUX-1*2: Any A/V source unit (TV, VCR, Video Game, etc. ) AUX-2*2: Any A/V source unit (TV, VCR, Video Game, etc. ) AUX-3*2: Any A/V source unit (TV, VCR, Video Game, etc. ) DVD*3: The picture from the S video output compatible Alpine head unit is output to the rear monitor. *1 If not connected to an IONBUS compatible head unit, AUX OUT1 is fixed to LINK. It is then used as audio output for the front (TMI-M990). *2 Only displayed when AUX IN 1, 2, 3 SIG. ON (See page 45). 28-EN Switching the Function of the Remote Sensor The remote sensors of the external unit (monitor, etc. ), can be selected for Remote control operation from the external unit. Setting item: REM. CON IN Setting content: FRONT, REAR-1, REAR-2 FRONT: The remote control sensor on the main unit is enabled. Remote control operation from any external monitor is disabled. REAR-1*4: The remote sensor of the external monitor connected to AUX OUT1 is enabled. Remote control operation of the source selected for AUX OUT1 only, is possible. REAR-2: The remote sensor of the external monitor connected to AUX OUT2 is enabled. Remote control operation of the source selected for AUX OUT2 only, is possible. *4 Can be set only when an IONBUS compatible head unit is connected. · When set to REAR-1/2, remote control operation cannot be performed on the FRONT (TMI-M990). In this case, perform operation with the buttons of the TMI-M990 main unit. 29-EN Other Useful Features V. SEL/ V. MUTE V. SEL/DISP. OFF Switching the Visual Source Only (Simultaneous Function) When an IONBUS compatible head unit is connected, you can watch the video portion of another source while listening to the current source. On the TMI-M990, you can watch video from the AUX or NAVI. while listening to the FM, AM or a CD on the head unit. * (Picture) (Audio) AUX-3 DVD DVD DVD NAVI. DVD AUX-2 DVD AUX-1 DVD * When simultaneous is off. 30-EN 2 Press V. SEL/DISP. OFF. The TMI-M990 picture source changes each time it is pressed. <Example> 1 Change to your preferred source (FM, AM, CD etc. ) on the head unit. For details, see the head unit operating instructions. Blackout Mode On and Off When Blackout mode is turned on, the display will turn off. The backlight life can be extended. The following operation is performed with the supplied remote control. 1 2 Press and hold V. SEL/V. MUTE for at least 2 seconds to start the blackout mode. [. . . ] There is no output from the AUX1 Video Output Terminal. 5 AUX Video/Audio Output (AUX2) Terminal 6 RCA Extension Cable (Sold separately) 7 AUX Video Input (AUX1) Terminal 8 AUX Audio Input (AUX1) Terminal 9 RCA Extension Cable p Remote Control Output Lead (White/Brown) q Remote Control Input Lead (White/Brown) 62-EN When Connecting External Equipmentt (When Connected to an IONBUS Compatible Head Unit) System Switch:When SYSTEM is set (See page 58) TMI-M990 Monitor 5 9 To Video Output terminal DVD Video Player (Sold Separately) To Audio Output terminal To Audio Input terminal 2 1 1 2 1:SYSTEM 2:STANDALONE 4 9 Bottom of the unit Rear monitor 1 (Sold Separately) To Video Input terminal TMI-M990 AV-Interface unit 3 9 To Video Input terminal Rear monitor 2 (Sold Separately) To Audio Input terminal 2 6 9 To Video Output terminal TV Tuner or VCR (Sold Separately) To Audio Output terminal To Video Output terminal * 7 9 Back-up camera (Sold Separately) REMOTE OUT(AUX1) 8 REMOTE IN (White/Brown) (White/Brown) REMOTE OUT(AUX2) 8 REMOTE IN (White/Brown) (White/Brown) REMOTE IN(AUX1) q REMOTE OUT (White/Brown) (White/Brown) REMOTE IN(AUX2) q REMOTE OUT (White/Brown) (White/Brown) REVERSE p Use only when back-up camera is connected. (Orange/White) 63-EN Installation and Connections 1 System Switch Change to "1:SYSTEM" when the main unit is connected with an IONBUS compatible head unit. When not connected to an IONBUS compatible head unit, change to "2:STANDALONE". · Be sure to turn the power off to the unit before changing the switch position. 2 Power Supply Connector 3 AUX Video/Audio Output (AUX2) Terminal Use when connecting an optional monitor etc. 4 AUX Video/Audio Output (AUX1) Terminal Use when connecting an optional monitor etc. 5 AUX Video/Audio Input (AUX1) Terminal 6 AUX Video/Audio Input (AUX2) Terminal 7 AUX Video Input (AUX3) Terminal Use when connecting a back-up camera. 8 Remote Control Output Lead (White/Brown) Connect this lead to the remote control input lead. This lead outputs the controlling signals from the remote control. 9 RCA Extension Cable (Sold separately) p Reverse Lead (Orange/White) Connect to the plus side of the car's reverse lamp which lights when the transmission is shifted into reverse (R). [. . . ]