User manual ALPINE VPE-S431

[. . . ] (RCS PONTOISE B 338 101 280) 98, Rue de la Belle Etoile, Z. I. 50016, 95945 Roissy Charles de Gaulle Cedex, France Phone 01-48638989 ALPINE ITALIA S. p. A. Colombo 8, 20090 Trezzano Sul Naviglio (MI), Italy Phone 02-484781 ALPINE ELECTRONICS DE ESPAÑA, S. A. Portal de Gamarra 36, Pabellón, 32 01013 Vitoria (Alava)-APDO 133, Spain Phone 945-283588 SE (RCS PONTOISE B 338 101 280) JEIL Moon Hwa Co. [. . . ] Cables or wiring that obstruct or hang up on places such as the steering wheel, shift lever, brake pedals, etc. can be extremely hazardous. USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS. Use for other than its designed application may result in fire, electric shock or other injury. MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in fire or product damage. 1-EN Feature This unit is designed to connect to the IVA-D300 series to expand their functions. In addition, when this unit is not connected to the IVA-D300 series, it can perform visual effects, switch video output to a rear monitor connected to this unit, etc. a Operations can be performed from the IVA-D300 series when connected. For details, refer to the Owner's Manual of the IVA-D300 series. a Operations can be performed from the touch panel monitor when connected. For details, refer to the Owner's Manual of the touch panel monitor. 2 Press the REAR SEL 1 or the REAR SEL 2 switch to select an item from the list below. AUX-1 AUX-2 AUX-3 DVD PLAYER*1 VISUALIZER*2 OFF SETUP RETURN *1 Displayed only when the IVA-D300 series are connected. *2 Displayed when VISUALIZER is set to other than OFF. When the IVA-D300 series are connected, this is displayed only when VISUALIZER is set to ON in the IVA-D300 series. · The AUX NAME set in "SETUP" is displayed for AUX-1, 2 or 3. 3 Press and hold the REAR SEL 1 or the REAR SEL 2 switch for more than 2 seconds. The selected source is displayed on the monitor. · When RETURN is selected, the display returns to the one prior to the SOURCE SEL. Operation This unit can be operated by connecting REAR SEL1 and REAR SEL 2 leads to a push switch (sold separately). For details, consult an authorized ALPINE dealer. REAR SEL 1, 2 leads OK SETUP Each setting can be performed by the procedure shown below. The setup menu is common for both REAR SEL 1 and REAR SEL 2. · When IVA-D300 series is connected, the VISEAL EFFECT, VISUALIZER and AUX IN-1, 2, 3 NAME cannot be set in this unit. Set these functions in the IVA-D300 series. Body of your car Push switch, etc. · Use a switch (sold separately) which has an automatic return function to connect with REAR SEL 1, 2 leads. · When operating with the Monitor Control 1, 2 leads, connect to a switch (sold separately) as well. The automatic return function is not necessary. (Refer to "SWITCHING THE REMOTE SENSOR" page 3. ) 1 2 3 4 Press the REAR SEL 1 or the REAR SEL 2 switch. The SOURCE SEL. display appears. Press the REAR SEL 1 or the REAR SEL 2 switch to change the setting item. Press and hold the REAR SEL 1 or the REAR SEL 2 switch for more than 2 seconds. The SETUP display appears. Switching the Output Source Video output from AUX OUT 1/2 for each monitor can be switched. 1 Press the REAR SEL 1 or the REAR SEL 2 switch. The SOURCE SEL. display appears. Press the REAR SEL 1 or the REAR SEL 2 switch to select the desired setting item. VISUAL EFFECT VISUALIZER AUX IN-1, 2, 3 SIGNAL AUX IN-1, 2, 3 NAME RETURN SOURCE SEL. AUX-1 AUX-2 AUX-3 DVD PLAYER VISUALIZER OFF SETUP RETURN 5 6 Press and hold the REAR SEL 1 or the REAR SEL 2 switch for more than 2 seconds to change the setting. After settings, press the REAR SEL 1 or the REAR SEL 2 switch to select RETURN, and press and hold the switch for more than 2 seconds. The SOURCE SEL. [. . . ] · The system is set to NTSC at time of shipment from the factory. Change the system to PAL, as necessary. AUX IN-1, 2, 3 NAME When more than one external device is connected, you can name each (up to 3) as you like. AUX / VCR / GAME-1, 2 / TV/ NAV. * · The selected source name is displayed instead of the AUX source name. * When IVA-D300 series is connected, "NAV. " can be set only in AUX-3 mode. Switching the Remote Sensor When an Alpine monitor which does not work with the touch panel is connected, the remote sensor can be switched by connecting the Monitor Control 1, 2 lead to a push switch, or similar (sold separately). 1 Press the Monitor Control 1 or 2 switch. While the switch is on, the remote sensor of the rear monitor connected to AUX OUT 1 or 2 is prior to the other, and the monitor can be operated with the remote control. 3-EN Connections DVA-5210/DHA-S680 series . *1 DVD Player or DVD Changer (Sold separately) + , ALPINE TV Tuner (Sold separately) ~ % - ) *2 " *3 % # $ IVA-D300 series &* 2 (Sold separately) / . REMOTE IN (White/Brown) ! REMOTE IN (White/Brown) ! 4-EN TME-M770 etc. ( % Touch Panel Rear Monitor 1 (Sold separately) REMOTE IN AUX1 (White/Brown) REMOTE OUT 2 (White/Brown) M. CONT1 (White/Pink) M. CONT 3 (White/Pink) TME-M760 etc. ( % Rear Monitor 2 (Sold separately) REMOTE IN AUX2 (White/Brown) REMOTE OUT 2 (White/Brown) 1 M. CONT2 (White/Pink) 3 4 REAR SEL1 (Gray/Pink) REAR SEL2 (Black/Pink) 5 IGNITION (Red) 6 BATTERY (Yellow) 8 7 GND (Black) 9 REMOTE OUT AUX3 REMOTE OUT AUX2 (White/Brown) (White/Brown) ! REMOTE OUT AUX1 (White/Brown) Continued 5-EN 1 Power Supply Connector 2 Remote Control Input Lead (White/Brown) Connect an external Alpine product to the remote control output lead. · Refer to the instruction manuals of the connected devices. · To connect with IVA-D300 series, some settings are necessary in IVA-D300 series. [. . . ]