User manual ALTEC LANSING 15000 TRANSFORMERS

[. . . ] In the United States, you may alternatively contact Altec Lansing by telephone at 1-800-ALTEC88 -- please be prepared to provide the same information. If the problem appears to be related to a defect in material or workmanship, Altec Lansing will provide you a return authorization and instructions for return shipment. Return shipments shall be at the customer's expense, and the return must be accompanied by the original proof of purchase. You should insure the shipment as appropriate because you are responsible for the product until it arrives at Altec Lansing. [. . . ] Power source ­ Use only power supplies of the type specified in the operating instructions or as marked on the appliance. If a separate power supply is included with this apparatus, do not substitute with any other power supply ­ use only manufacturer-provided power supplies. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. For service, refer to qualified service personnel, return to the dealer, or call the Altec Lansing service line for assistance. For products which incorporate batteries, please refer to local regulations for proper battery disposal. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Customer Service The answers to most setup and performance questions can be found in the Troubleshooting guide. You can also consult the FAQs in the customer support section of our Web site at www. alteclansing. com. · Set the volume on the alternate audio source at mid-level. · Set the volume on the 15000 TRANSFORMERS at minimum level and adjust upward to a comfortable listening level. Placing 15000 TRANSFORMERS Position 15000 TRANSFORMERS on a stable, level surface. Power On/Off · Insert the barrel connector from the power supply into the DC connector on the rear of the 15000 TRANSFORMERS system. After this connection is made, insert the power supply into a wall outlet. · Turn on the 15000 TRANSFORMERS by pressing the power button located on the top of the unit. · Turn off the 15000 TRANSFORMERS by pressing the power button located on the top of the unit. Note: To avoid hearing a popping sound when you turn on the 15000 TRANSFORMERS, always turn on your iPhone (or alternate audio source) first. Volume The "+" and "­" buttons on the top of the 15000 TRANSFORMERS are the master volume controls. Press and hold the "+" button to increase the volume and the "­" button to decrease the volume. An LED indicator is located on the front of the unit. 4 Treble and Bass To control treble or bass levels, press the TREBLE or BASS buttons on the top of the unit and press and hold the "+" button to increase the corresponding level, or the "­" button to decrease it. An LED indicator located on the front of the unit will. indicate the corresponding level. Note: After a few seconds, the "+" and "­" controls will automatically reset to controlling the volume. Resetting the system to original factory settings To reset either the treble or bass function to its original factory setting, press and hold the corresponding TREBLE or BASS button on the top of the unit for 5 seconds. To reset volume, bass and treble functions to original factory settings, press and hold the button on the top of the unit for 5 seconds. Wireless Remote Control In order to use the remote control, install the supplied battery in the remote's battery compartment. [. . . ] See the device user's guide for details. Disconnect the power supply from the wall outlet. Reconnect the power supply. The 15000 TRANSFORMERS exhibits erratic or unexpected behavior. Controls do not function. Static electricity, momentary interruption of power, or abnormal operating conditions may be responsible. 6 This Class B digital apparatus complies with Canadian ICES-00. [. . . ]