User manual ALTEC LANSING 150B PAGING HORN

[. . . ] The new Altec Lansing Professional transformers, T560-71 and T5100-71, are perfect complements to our premium Duplex® Speakers when the prerequisite is high fidelity. [. . . ] These transformers are designed for 70. 7V or 100V distribution of amplifier power, with minimal loss, to multiple loudspeakers. True electrical isolation is provided to the source and the load by the primary and secondary windings respectively. Installation is simple with 0. 25-inch blade type wire terminals, allowing either solder connections or crimp type quick-connect wire terminals. specifications Power Rating: 60 Watts (T560-71); 100 Watts (T5100-71) Phase Response: -15º to +35º Secondary Taps: 70. 7V and 100V Hi-Pot: 500 VAC Insertion loss: Frequency Response: 35 Hz to 15 kHz, ±0. 5 dB < 1 dB from 35 Hz to 15 kHz (typically < 0. 5 dB from 35 Hz to 10 kHz) Total Harmonic Distortion: < 0. 5% at Rated Power, from 35 Hz to 15 kHz Primary Taps: 4 and 8 Weights & measures Length Width Height Hole Hole Hole Winding Core Bracket Weight Center on Center on Dimension Thickness Thickness Thickness Length Width T560-71 T5100-71 3. 75" 3. 50" 3. 39" 3. 00" 0. 25" x 0. 35" 4. 06" 2. 00" 0. 063" 8 lbs. 1000 W. The T560-71 and T5100-71 shall provide true electrical isolation to the source and to the load. Connection to these transformers shall be through 0. 25-inch blade type wire terminals. The nominal primary taps shall be 4 ohm and 8 ohm, and the nominal secondary taps shall be 70. 7V and 100V. round white metal grille. E voltage ratio 4 Ohm to 70 V T560-71 T5100-71 1:4. 5 1:3. 5 4 Ohm to 100 V 1:6. 4 1:5. 0 8 Ohm to 70 V 1:3. 2 1:2. 5 8 Ohm to 100 V 1:4. 6 1:3. 5 4/8 term to 70 V 1:10. 9 1:8. 5 4/8 term to 100 V 1:15. 4 1:12. 0 impedance ratio 4 Ohm to 70 V T560-71 T5100-71 1:20. 8 1:12. 5 4 Ohm to 100 V 1:41. 7 1:25. 0 8 Ohm to 70 V 1:10. 4 1:6. 3 8 Ohm to 100 V 1:20. 8 1:12. 5 4/8 term to 70 V 1:21. 9 1:13. 1 4/8 term to 100 V 1:44. 0 1:27. 0 wiring diagram 100 V 8 70. 7 V 4 COMMON COMMON PROFE S S IONA l © 2002 Altec Lansing Professional 1000 W. [. . . ] The nominal primary taps shall be 4 ohm and 8 ohm, and the nominal secondary taps shall be 70. 7V and 100V. round white metal grille. E voltage ratio 4 Ohm to 70 V T560-71 T5100-71 1:4. 5 1:3. 5 4 Ohm to 100 V 1:6. 4 1:5. 0 8 Ohm to 70 V 1:3. 2 1:2. 5 8 Ohm to 100 V 1:4. 6 1:3. 5 4/8 term to 70 V 1:10. 9 1:8. 5 4/8 term to 100 V 1:15. 4 1:12. 0 impedance ratio 4 Ohm to 70 V T560-71 T5100-71 1:20. 8 1:12. 5 4 Ohm to 100 V 1:41. 7 1:25. 0 8 Ohm to 70 V 1:10. 4 1:6. 3 8 Ohm to 100 V 1:20. 8 1:12. 5 4/8 term to 70 V 1:21. 9 1:13. 1 4/8 term to 100 V 1:44. 0 1:27. 0 wiring diagram 100 V 8 70. 7 V 4 COMMON COMMON PROFE S S IONA l © 2002 Altec Lansing Professional 1000 W. [. . . ]