User manual ALTEC LANSING 311-60 HF HORN

[. . . ] Heed Warning -- All warnings on the appliance and in the operating instructions should be adhered to. Follow Instructions -- All operating and use instructions should be followed. Water and Moisture -- The appliance should not be used near water ­ for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc. Outdoor Use -- Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. [. . . ] In some setup configurations, you may use the supplied composite video (yellow) RCA extender cable to allow increased separation between the TV and subwoofer. Note: For the clearest sound, try muting your TV's speakers when using the TV as an audio source. Master Control The knob on the wired controller is the master volume control for the speaker system. Turn the knob clockwise to increase the volume and counter-clockwise to decrease the volume. Audio Speaker System Welcome to the extraordinary world of Altec Lansing high-fidelity sound. The 311-60 HF HORN is a 2. 1 analog system that blows away the lame speakers inside your TV. Plus, with a bass EQ mode selector, you'll feel the rumble of your favorite games and movies. Great television sound isn't all you'll experience with the 311-60 HF HORN system. With 40 watts of total system power, it delivers thrilling performance from video gaming systems, DVD players, MP3 players, CD players and other audio sources. System Specifications Total System Power: AUXILIARY INPUT This auxiliary or secondary input is located on the subwoofer. Connect any audio source that has a stereo 3. 5mm plug (i. e. headphone style jack), including portable CD or MP3 players. Caution: Make sure the audio source features a line-out jack. This will ensure that the output is not amplified. After all other connections are made, plug the power adapter into the back of the subwoofer and into an AC wall socket. NOTE: To ensure a secure connection, the power adapter uses a locking connector. To unlock the power adapter, don't simply pull on the cable. Gently pull back the connector sleeve until it releases. Turn on the audio source (TV, video gaming system, DVD player or VCR). Turn on the Altec Lansing 311-60 HF HORN speaker system by pressing the power button on the wired controller (see below. ) A green EQ LED on the wired controller will illuminate. Note: To avoid hearing a popping sound when you turn on your Altec Lansing speaker system, always turn on your audio source first. Using the Wired Controller Making Connections WARNING: Do not insert the speaker system's power adapter plug into an AC outlet until all connections are made. Also, turn off your audio source (i. e. , TV, video gaming system, DVD player or VCR) before connecting its outputs to the 311-60 HF HORN's inputs. To ensure first-time operation as expected, please carefully follow the connection sequence described below. SATELLITE SPEAKERS To set-up the 311-60 HF HORN system, plug the right satellite's orange connector into the "RIGHT" output on the rear of the subwoofer and the left satellite's brown connector into the "LEFT" output on the rear of the subwoofer. WIRED CONTROLLER Connect the grey-colored DIN connector from the wired controller into the grey "CONTROLLER" jack on the rear of the subwoofer. [. . . ] Connect the wired controller to the subwoofer. Plug another device into the same jack on the wall outlet to ensure the outlet is working. Wired controller isn't connected to the subwoofer. DIN connector not inserted in subwoofer jack. Verify that the grey-colored DIN connector is firmly inserted into the DIN connector jack on the subwoofer. Ensure the pins are aligned between the plug and jack. Remember, the arrow should be facing up. No sound from one or more speakers. Power isn't turned on. Verify that the subwoofer's AC power cord is plugged into both the wall outlet and subwoofer. [. . . ]