User manual ALTEC LANSING 8055B SIGNAL PROCESSING

[. . . ] I Ce système est équipé d'une technologie de protection contre les copies qui cause une importante dégradation de l'image quand le contenu d'un disque est copié sur une vidéocassette. Copy Protection: This unit supports Macrovision copy protection. On DVD discs that include a copy protection code, if the contents of the DVD disc are copied using a VCR, the copy protection code prevents the videotape copy from playing normally. 4, 631, 603, 4, 577, 216, 4, 819, 098, and 4, 907, 093, licensed for limited viewing uses only. This product incorporates copyright protection technology that is protected by method claims of certain U. S. [. . . ] I You can also press the 5/3 or 2/4 button on the remote control for the same operation. Press and hold down the 5 Scanning speed selection 3 PRESET X or 2 4 1 PRESET W button for more DVD than 1. 5 seconds whilst a disc is playing. Fast scan image appears here 1 (about X 2) 2 (about X 8) 3 (about X 32) 2 Press the 0 button to return to normal playback. Notes: I On some discs, the fast scan function is disabled. I On DVD-Video discs, sound and subtitles are not played back during the fast scan playback. (Only at fast forward 1 speed sound can be heard. ) I With a DVD-Video disc, you can search within one title only. E-33 *DV484W_EP31-33 33 04. 2. 20, 17:24 XL-DV484W(Z) TINSZA032AWZZ Using the function control H About the function control screen Using function control, you can check at a glance and change the current settings of the following items: subtitle, angle, audio, digital gamma and digital super picture. Function control also provides you three ways of direct skips (title, chapter and time). I Whilst the disc is playing, press the SET UP button whilst pressing down the SHIFT button to display the screen shown below. I Pressing the cursor L or M button changes the currently selected item. Direct title skip Direct chapter skip Direct time skip Subtitle Angle Audio 3-D Virtual Surround Digital gamma Digital super picture Direct title skip (page 35) The number of the title currently played back is displayed. You can skip directly to the desired title. Direct chapter skip (page 35) The number of the chapter currently played back is displayed. You can skip directly to the desired chapter. Then press the cursor 1 or 0 button to select the place where you want to enter the time. I You can also press the SUB TITLE button on the remote control for the same operation in step 3. (You do not need to do the steps 1 and 2. ) I This function can only be used for discs on which subtitles have been recorded with multiple subtitles. I Some DVD discs are marked "Forced Display". With such discs, the subtitles OFF". This does not indicate a fault will be displayed even if you select " with your unit. I If no subtitles are recorded on the disc, " xx" is displayed. H Angle setting 4 DVD Press the ENTER button to confirm the setting. You can exit the function control screen by pressing the SET UP button whilst pressing down the SHIFT button or the RETURN button. 4 3 S P AN I S H Notes: I You can also press the ANGLE button on the remote control for the same operation in step 3. (You do not need to do the steps 1 and 2. ) I This function can only be used for discs with multiple angles recorded. You can also toggle the setting between "OFF" and the selected language by pressing the cursor 1 or 0 button. 4 Press the ENTER button to confirm the setting. You can exit the function control screen by pressing the SET UP button whilst pressing down the SHIFT button or the RETURN button. E-36 *DV484W_EP34-37 36 04. 2. 20, 17:24 XL-DV484W(Z) TINSZA032AWZZ XL-DV484W 8055B SIGNAL PROCESSING ENGLISH Using the function control (continued) H Audio setting A number of different methods are used to record audio onto a DVD-Video disc, including multi-channels (used for voiceovers in other languages), DTS, MPEG audio and Linear PCM. Your system provides a number of different audio modes from which you can choose to suit the type of disc you are playing. H 3-D Virtual Surround setting I You can enjoy 3-D surround on DVD with Dolby Digital Sound. I You can also enjoy 3-D surround using 3 speakers. 1 Press the SET UP button whilst pressing down the SHIFT button during playback. The function control screen appears. 1 2 Press the SET UP button whilst pressing down the SHIFT button during playback. The function control screen appears. Advanced DVD Features 2 Use the cursor L or M button to select and then press the ENTER button. Press the cursor L or M button to select the audio format you want to use. DVD H 2 1 D Use the cursor L or M button to select and then press the ENTER button. ON P CM N 5. 1 c h 2L 0 G S 0 10 BIT RATE Mbps ON ENTER SELECT ENTER RETURN 5. 1 c h 0 0 10 3 2/5 10 / 30 01 : 06 : ­­ I SH 2 2 L P CM N 5. 1 c h 0 0 3 4 5 Press the cursor L or M button to select "ON" or "OFF". Whilst "ON" is selected, use the cursor 1 or 0 button to change the level setting. ON P CM N 5. 1 c h 2L 0 G S 0 10 DVD BIT RATE Mbps ON ENTER SELECT ENTER RETURN 10 Press the ENTER button to confirm the setting. You can exit the function control screen by pressing the SET UP button whilst pressing down the SHIFT button or the RETURN button. 4 Press the ENTER button to confirm the setting. You can exit the function control screen by pressing the SET UP button whilst pressing down the SHIFT button or the RETURN button. Notes: I 3-D Virtual Surround will not function when Compression is set to ON. [. . . ] G Cannot record tracks with proper sound quality. G Cannot remove the tape. Possible cause G Is the erase-protection tab removed?(You cannot record on a metal or CrO2 tape. ) G Is there any slack?G Are the capstans, pinch rollers, or heads dirty? [. . . ]