User manual ALTEC LANSING 938-8AE SPEAKER SYSTEM

[. . . ] €¢ Check if the power for the wireless router is on. €¢ Check if other devices (Notebook PC, Smart phone etc. If wireless router is not searched by even other devices, the wireless router is probably the issue. please contact with wireless router manufacturer. [. . . ] €¢ If the wireless router is located far away from the Fridge, move the wireless router closer to the Fridge and check if it is detected. €¢ Turn the power of both the Wireless router and the Fridge off and on. Can’t remember the password for the wireless router connection. €¢ Refer to the wireless router manual and reset the password. The fridge is not able to connect to the wireless router. Touch the ∨ button in the right bottom corner of the Settings list. NOTE If you can’t remember the name of your wireless network system (SSID) or its security code, please see the user manual of your router. After the refrigerator has connected to your network, you can press the IP Address button on the Wi-Fi Networks screen to view the current IP address and Gateway values. Touch the Wi-Fi ON button on the Settings list. ) • In accordance with Internet providers, if you registered MAC ADDRESS registration and certification of other device upon initial enrollment, it may not be connected because MAC ADDRESS of existing authentication device and a refrigerator are different. In this case, contact with Internet service provider for assistance in adding additional devices your Internet access. €¢ Turn the power of both the Wireless router and the Fridge off and on. Functions using the wireless network (Wi-FI) do not work. €¢ Functions using the wireless network (Wi-Fi) such as Epicurious, Calendar, Weatherbug, AP News and Twitter can be used only if the refrigerator is connected to your wireless network (Wi-Fi). €¢ If there are any other devices connected to the wireless network, please check the connection status of the devices. €¢ Because these services depend on data downloaded from the internet, the information updates can be delayed or cut depending on the status of the internet connection. €¢ Turn off the power to the Wireless router and the Fridge then back on. After entering the values for all four parameters, touch the Apply button. [. . . ] €¢ Turn off the power to the Wireless router and the Fridge then back on. After entering the values for all four parameters, touch the Apply button. –¶ : Locked with Security Code, : Signal Strength ▶ Depending on the wireless router type, the refrigerator may not make a connection. We recommend you use a wireless router that supports IEEE 802. [. . . ]