User manual ALTEC LANSING 950-8A CEILING SPEAKER

[. . . ] • 8” LCD Touch Screen Display The brilliant 8” Color LCD Touch Screen displays cycle information , settings , options , and more. The easy-to-use interface allows you to scroll through all wash cycles with the slightest touch. € Smart Control Samsung’s innovative Smart Control technology enables you to control your washer through personal technology devices such as smart phones. You don’t have to be on standby until the cycle ends. [. . . ] Tap the Description if you want to view the description of the selected cycle. Tap the appropriate option button to control the Temperature, Spin Speed, Soil Level, Extras cycles. € Some values of each option can be disabled. For information on the default factory setting and the selectable settings for each option, refer to the “Cycle chart” section on page 66. € The Extras settings can only be turned On or Off. € The last used settings of the options are saved for that cycle. They are shown if the same cycle is selected again. Tap the left arrow if you want to return to the Cycle pane to select another cycle you want to use. Press the Start/Pause button to start the wash. The Cycle Status screen (shown on the right) is displayed on the LCD panel and shows the current status of the wash including the remaining time, the current phase of the cycle, and other available indicators and controls. Press the Power button to cancel the cycle and turn off your washer. Select the My Cycle button you want to overwrite with the selected cycle and its options. in this example , we selected My Cycle 1: None. in this example , we entered “J’s Wash”. A summary of the My Cycle that will overwrite the existing cycle is displayed, as shown in the figure on the right . The My Cycle “None1” is changed to “J’s Wash” in the My Cycle list on the Cycle Selection screen. Starting a My Cycle Follow the steps below to start a My Cycle to wash your laundry. Tap the My Cycle button in the Cycle Selection screen. Press the Start/Pause button to start your wash. Using the Delay Start function By activating the Delay Start function, you can set your washer to start your wash automatically at a specified later time. Activating Follow the steps below to activate the Delay Start function. Tap the Delay Start OFF ( ) button located at the bottom right of the Cycle Selection screen. [. . . ] To receive in-home service, product must be unobstructed and accessible to the service agent. If service is not available, ALTEC LANSING may elect to provide transportation of the product to and from an authorized service center. ALTEC LANSING will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of ALTEC LANSING and must be returned to ALTEC LANSING. [. . . ]