User manual ALTEC LANSING INMOTION IM600

[. . . ] User's guide The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Caution: To prevent the risk of electric shock, do not remove cover (or back). Refer servicing to qualified service personnel. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION To prevent electric shock do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. ALTEC LANSING ONE YEAR LIMITED WARRANTY (TWO-YEAR LIMITED WARRANTY IN THE EUROPEAN UNION AND ASIA) What Does The Warranty Cover?: Altec Lansing warrants that its products shall be free from defects in materials or workmanship, with the exceptions stated below. What Is The Period Of Coverage?: For units purchased in European Union or Asia, this warranty runs for two years from the date of purchase. For units not purchased in Europe or Asia, this warranty runs for one year from the date of purchase. [. . . ] For more detailed information about recycling of this product, please contact your local city office or your household waste disposal service. 2 INMOTION IM600 DIGITAL SPEAKER SYSTEM FOR IPOD ® The New Standard from the Company that Set the Standard Thank you for purchasing the Altec Lansing iM600 digital speaker system for iPod. When Altec Lansing introduced the original inMotion, it set new standards for sound and size and let a whole lot of music out of the iPod. Today, the new iM600 raises the bar again with an innovative and performance-leading design. Box Contents · · · · inMotion iM600 mobile speaker system Wireless remote Power supply User's guide and quick connect instructions Made for: · · · · · · · · · iPod iPod iPod iPod iPod iPod iPod iPod iPod touch classic with video nano (3rd generation) nano (2nd generation) nano (1st generation) with color display mini with dock connector INMotion IM600 After this connection is made, insert the power supply into a wall outlet. DC (Battery) Power The inMotion iM600 features a built-in rechargeable Lithium-ion battery. Charging time up to 3 hours Continuous Playing Time up to 5 hours Charging the rechargeable battery: The battery should be fully charged before initial use. To recharge the battery, insert the barrel connector from the power supply into the DC connector on the rear of the inMotion iM600. After this connection is made, insert the power supply into a wall outlet. When the battery is fully recharged, the indicator light turns off. When the battery icon on the LCD screen displays a single segment the battery should be recharged. When the icon starts flashing, the iM600 is about to shut down. Warning: During the recharging process it is typical for the battery to become warm. To be safe, keep flammable materials away from the inMotion iM600. Note: To conserve battery power, reduce the inMotion iM600 volume level. Disconnecting the rechargeable battery: 1. Unplug the inMotion iM600 from the wall outlet. Open the inMotion iM600 by pressing the button on the front of the speaker system. Remove the rechargeable battery compartment cover by removing the 2 screws. Unplug the battery and remove it. Start Playing Placing the Open the inMotion iM600 by pressing the button on the front of the speaker system. Position the inMotion iM600 on a level surface, preferably close to you (within three feet). Assembling the INMotion IM600 1. Turn on the inMotion iM600 by pushing the button. Press the SOURCE button until "iPod" is displayed on the LCD screen. Note: To avoid hearing a popping sound when you turn on your inMotion iM600, always turn on your audio source first. Power Off Dock your iPod by sliding your iPod on top of the iM600 docking station. [. . . ] If using an alternate audio source, the audio source is not properly connected to the inMotion iM600 or there is a problem with the alternate audio source. 5 Symptom Possible Problem Solution There is a crackling sound coming from speakers. The iPod is not correctly seated into the docking station. If using an alternate audio source, the audio source is not properly connected to the inMotion iM600 or there is a problem with the alternate audio source. Turn off the iPod, remove it from the docking station, reseat it, and turn it on again. · Connect an alternate audio source--such as a CD player, MP3 player, or portable DVD player--to your inMotion iM600 by plugging one end of a 3. 5mm stereo cable (sold separately) to the line out of your portable device (if it has one) or to the device's headphone jack. Connect the other end to the input marked "AUX" on the back of the inMotion iM600. [. . . ]