User manual ALTEC LANSING INMOTION MAX IMT702

[. . . ] Play Mode : Setting the repeat playback(Initial setting : Normal) Equalizer : Setting the Equalizer function Hold : Setting the Hold function Delete : Deleting files Setting : Setting the INMOTION MAX IMT702 display Contrast, Backlight and Scroll Speed Repeat Track Mode INMOTION MAX IMT702 Press the MODE button for more than 2 seconds during playback or in the STOP mode to access the MENU mode. Use the FF/REW button( ) to move to other options and use the PLAY/STOP button( ) to select. Normal - Repeat One - Repeat All - Shuffle - Intro Normal : Playback once in the track order recorded - The initial setting is "Normal" and there is no icon display in this mode. Repeat One : To listen to one track only repeatedly Repeat All : To listen to all tracks repeatedly Shuffle : To listen to the tracks in random order Intro : To listen to the beginning of all the tracks stored(Plays for 10 seconds) Go Up : To move to the upper menu mode 15 Setting the Equalizer(EQ) Select "2. Move to the desired tone by using the FF/REW button( ). [. . . ] To exit from the DELETE mode, select "5. Go up" or press the MODE button. 18 3 Mp3128 Setting Options INMOTION MAX IMT702 Select "5. Setting" in the MENU mode. Move to the desired function in the SETTING mode by pressing the FF/REW button ( ). Select the desired function by pressing the PLAY/STOP button( ). Cont rast - See page 20 Back light- See page 21 Scroll Speed - See page 22 19 3 Mp3128 Setting Option Setting the LCD Contrast After selecting "5. Setting" in the MENU mode, choose "1. Set the contrast by pressing the FF/REW button( ). CONTRAST CONTRAST 00 20 You can adjust the contrast from 0 to 20. To exit press the PLAY/STOP button( ). 20 INMOTION MAX IMT702 Setting the Backlight After selecting "5. Setting" in the MENU mode, choose "2. Backlight". Set the backlight by pressing the FF/REW button( ). Settings Availabe : Never : No backlight(You can save battery life, if it is set to never) 1 Sec. ON : Backlight ON for 5 Seconds Finish the setting by pressing PLAY/STOP( )or select "5. Go Up" to switch to the upper menu. 21 3 INMOTION MAX IMT702 Setting Options Setting Scroll Speed After selecting "5. Setting" in the MENU mode, choose "3. Scroll Speed". Set the scroll speed by pressing the FF/REW button( ). You can adjust the scroll speed from 0 to 10. To exit press the PLAY/STOP button( ). 22 Installing the Software on a Personal Computer(PC) Insert the GROOVE CD supplied with the INMOTION MAX IMT702 into the CD-ROM drive. Click the [Next] button at every consecutive window. Press OK to finish. INMOTION MAX IMT702 31 Formatting the INMOTION MAX IMT702 1. Connect the INMOTION MAX IMT702 to the PC and run GROOVE. Select [File] [Format] on the Menu Bar, or [Format] icon 3. A window will appear to confirm the formatting, select [YES]. Note : Formatting will delete all files from memory. 32 Moving the location of a file 1. Connect the INMOTION MAX IMT702 to the PC and run GROOVE. Drag and drop the selected file to the desired location. INMOTION MAX IMT702 33 Setting options Select [Tools] [Option] on the menu bar or [Option] icon Viewing download status Setting a [Favorites] folder 34 Cautions Do not drop the unit. Do not let the unit get wet. INMOTION MAX IMT702 - If the unit is wet with water, remove batteries and quickly wipe with a dry cloth and let sit for 4~5 hours. Contact a service center if unit malfunctions. Keep the unit away from places with excessive moisture, magnetism or heat. Do not clean the unit with thinner, alcohol or benzene. It may cause damage. 35 Troubleshooting Software is not operational. [. . . ] - Check the the battery charge level and check the polarity +/- of the battery. The unit wouldn't work even when the buttons are pressed. No music even when pressing the PLAY button in the MP3 mode. - Check if MP3 files are stored in the Internal Memory. [. . . ]