User manual ALTEC LANSING LF1 LF2 HI FI SPEAKER

[. . . ] Cut the tubing, making sure the ends are square and clean. 6 (1) Freezer (Hold 3 sec for Power Freeze) (2) Fridge (3) Energy Saver (4) (5) (6) Power Freeze Press the Freezer button to set the freezer temperature between colder and coldest. [. . . ] Press and hold the Freezer button for 3 seconds to activate Power Freezer function which speeds up the freezing process in the freezer. Press the Fridge button to set the Fridge temperature between colder and coldest. For better energy efficiency, press the Energy Saver button. If condensation occurs on the doors, turn the Energy Saver Incorrect Correct Temperature Indicator moving) • refrigerator not to generate cool air. S) There are several items that you need to purchase to complete this connection. You may find these items sold as a kit at your local hardware store. use Copper Tubing ¼” copper tubing ¼” compression nut (1pc) Ferrule (2pc) Use Plastic Tubing Molded end ¼” plastic tubing (Bulb) ¼” compression nut (1pc) [RF221 , RF220] button. cOOLING OFF KEY RL220 Model : Power Freeze + Freezer Key - 6. Noise Clicks, Pops, Cracks, Snaps • These noises may be heard occasionally inside the refrigerator. This sound occurs when various items contract or expand while temperatures are changing; especially during defrosting. This may also occur when electronic devices including the ice maker are operating. Water dispenser Intallation(On some models) • Turn on water installation and Flush 3 gallons through filter before use (flush approximately 6 minutes) 1. Leveling & Door Alignment • Insert a flat-blade screwdriver into a slot on the control lever, turn it clockwise or counterclockwise to level the door. control Lever Flat-blade screw driver(-) 7. [. . . ] control Lever Flat-blade screw driver(-) 7. Display [RF221, RF220] 1 [RL225] 2 3 • The water filter must be installed outside the refrigerator. [. . . ]