User manual ALTEC LANSING MRII542 HF HORN

[. . . ] Because the following instructions cover various models, the characteristics of your refrigerator may differ slightly from the refrigerator described in this manual. If you have any question, contact us at 1-800-ALTEC LANSING or find help and information online at www. CRITICAL INSTALLATION WARNING WARNINGS • Do not install the refrigerator in a damp place or place where it may come in contact with water. - Deteriorated insulation of electrical parts may cause an electric shock or fire. [. . . ] Water Water mode will be off if you touch the Ice Type button. ( 2 ) Freezer (Hold 3 sec for Power Freeze) ( 5 ) Fridge (Hold 3sec for Power Cool) ( 3 ) Alarm / hold 3 sec for Filter Reset ( 6 ) Ice Off (Hold 3 sec for child lock) ( 7 ) Ice Type (Cubed) (Crushed) ( 8 ) Water Water operating _11 DA68-02488A. 12 4:38:34 PM Cooling Off Mode Cooling Off mode (also called Shop mode), is designed for use by retailers when they are displaying refrigerators on the shop floor. In Cooling Off mode, the refrigerator's fan motor and lights work normally, but the compressors do not run, and the refrigerator and freezer do not get cold. To start Cooling Off mode, touch and hold the Energy Saver button and the Power Freeze button for 5 seconds during normal operation. The refrigerator chime sounds and the temperature display flashes OF OF. To cancel Cooling Off mode, touch and hold the Energy Saver and the Power Freeze buttons again for 5 seconds. If you don’t want to make more ice, touch the Ice Off button. The icon will light up and the Ice-Maker stops making ice. We recommend you stop ice making if the following occur: - There is enough ice in the ice bucket. - Water is not being supplied to the refrigerator. € To prevent overflow, empty the water filter tray ( 3 ) and dry around the filter case ( 2 ). Insert the new filter into the filter case ( 4 ). Push the filter, and then turn it clockwise until it locks. € If you have trouble inserting the water filter because of high water pressure, shut off the water supply valve. 12 4:38:35 PM • The locked symbol should be lined up with the indicator line. minimum of 40 to 60 psi (276 to 414 kPa. ) If the water pressure to the reverse osmosis system is less than 40 to 60 psi (276 to 414 kPa): • Check to see whether the sediment filter in the reverse osmosis system is blocked. € Allow the storage tank on the reverse osmosis system to refill after heavy usage. € If your refrigerator has a water filter, it may further reduce the water pressure when used in conjunction with a reverse osmosis system. If you have questions about your water pressure, call a licensed, qualified plumber. Touch the "Alarm/hold 3 sec for Filter Reset" button ( (Filter Reset) ) for about 3 seconds to reset the water filter. [. . . ] To receive in-home service, the product must be unobstructed and accessible from floor level to service personnel. If during in-home service repair cannot be completed, it may be necessary to remove, repair and return the product. If in-home service is unavailable, Samsung may elect, at our option, to provide for transportation of our choice to and from a Samsung authorized service center. Otherwise, transportation to and from the Samsung authorized service center is the responsibility of the purchaser. [. . . ]