User manual AMERICAN AUDIO DCD-PRO400

[. . . ] Featuring: Fader "Q" Start & Seamless Loop PROformer plus designed for the working dj © American DJ® AUDIO Los Angeles, CA 90058 USA · www. americandj. com IMPORTANT SAFETY ITEMS FOR U. S. A. & CANADA MODEL ONLY WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS CD PLAYER TO WATER OR MOISTURE. NOTE: This CD player uses a semiconductor laser. It is recommended for use in a room at the following temperature: 41°F - 95°F / 5°C - 35°C CAUTION: 1. Do not damage or deform; it may cause electric shock or malfunction when used. [. . . ] You can also tap the CUE button to create a BOP EFFECT (for definition of BOP EFFECT, see page 5). OUT / EXIT - Used to set the ending point when looping. When the OUT/EXIT button is pressed, the player will play the loop continuously. To exit the loop, press the OUT/EXIT button again. PLAY/PAUSE BUTTON - Each press of the PLAY/PAUSE BUTTON causes the operation to change from play to pause or from pause to play. 23. RELOOP BUTTON - If a SEAMLESS LOOP has been made, but the CD Player is not actively in SEAMLESS LOOP mode, press the RELOOP BUTTON (23) to reactivate the SEAMLESS LOOP mode. RELOOP will appear in the LCD DISPLAY (37). To exit loop, press the OUT/EXIT BUTTON (21). PROGRAMMED CUE POINTS - Indicates how many CUE POINTS have been saved. CUE INDICATOR- appears when the CUE BUTTON (20) is pushed. PLAY INDICATOR ( ) - The PLAY indicators light during playback. PAUSE INDICATOR ( ) - The PAUSE indicators light during pause or cue mode. TRACK INDICATOR - Displays which TRACK is being played. PROGRAM INDICATOR - This lights when program mode is set or played. REPEAT Indicator - (REPEAT 1, REPEAT ALL) These light during repeat one or all playback. MINUTE, SECOND INDICATOR - Displays time of current track. PITCH OR BPM DISPLAY - Show either beat per minute or percent of pitch adjustment (see also 17, 18). BPM INDICATOR - Lights when BPM Button is engaged. PITCH INDICATOR- Lights when PITCH is engaged. ELAPSED & TOTAL REMAIN INDICATORS - These indicate that the time shown on the display is the ELAPSED, TOTAL remaiming or SINGLE song remaining time. LOOP, RELOOP - Appears when LOOP is engaged. LOOP flashes in LCD DISPLAY (8) when playing loop. [. . . ] next, tap the COUNTER BUTTON (18) firmly to the beat of the music until a BPM is displayed on the LCD DISPLAY (33). (2) Repeat step 1 for the song you want to mix in. You can listen in by cueing it in your headphones using your mixer or by following the BEAT LED [above BPM (17)] on the CD Player. (3) Engage Pitch by pressing PITCH (6) on the side you want to use, make sure Readout is in BPM by pressing BPM BUTTON (17) until BPM is lit on LCD DISPLAY (33). [. . . ]