User manual AMERICAN AUDIO PRO-DJ2

[. . . ] PRO-DJ2 front load professional single CD player featuring: Seamless Loop, Fader "Q" Start, BOP Effect, Flip Flop and Digital Output © American DJ® AUDIO Los Angeles, CA 90058 USA IMPORTANT SAFETY ITEMS FOR U. S. A. & CANADA MODEL ONLY WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS CD PLAYER TO WATER OR MOISTURE. NOTE: This CD player uses a semiconductor laser. It is recommended for use in a room at the following temperature: 41°F - 95°F / 5°C - 35°C CAUTION TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE CAREFULLY INSERTED TO PREVENT BLADE EXPOSURE. CAUTION: 1. Do not damage or deform; it may cause electric shock or malfunction when used. [. . . ] Never disassemble or modify the unit in any way. American DJ® AUDIO · PRO-DJ2 INSTRUCTIONS MANUAL · PAGE 6 MAIN FEATURES (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (a) 8 times over sampling 1 bit D/A converter Auto cue 1/75th second frame search Realtime cue ("Cue on the Fly") 6 different speed scan Pitch display 10 number buttons for direct track access 30 programmable tracks 10 cue points can be memorized Digital output RCA coaxial Fader "Q" Start Function, controls play and stop function via a compatible ADJ "Q Deck" mixer. (a) Large bright LCD Screen can be viewed from (13) (14) (15) (16) (17) (18) (19) (20) (21) (22) (23) (24) wide angles. 60 seconds transport protection (b) Seamless Loop CD Recordable (CDR) compatible Flip-Flop, Relay Playback when used in pairs (c) +/- 8%, 12%, 16% selectable on Pitch Slider Sleep Mode after 15 min. (d) Bop Effect (e) Jog Wheel Pitch Bend +/- 16% Memory Backup, Default to last setting (f) Instant Start "Q" Start Control (g) Light weight and compact design. (b) (c) (e) SLEEP MODE PROTECTION: After 15 minutes in PAUSE or CUE Mode the CD drive mechanism will automatically go in to sleep mode. This function shuts down the laser pick-up diode extending the life of the unit. During sleep mode the LCD screen will flash repeatedly indicating sleep mode is activated - This is not a malfunction, to restart the drive simply press the Cue or Play/Pause Buttons 60 SECOND TRANSPORT PROTECTION: Will automatically close transport if left open for more than 60 seconds to prevent someone from walking by and breaking the transport. FLIP-FLOP: On the rear of the PRO DJ2 there is a control input jack, use a standard stereo mini plug to plug in one PRO DJ2 to another, via the control jacks. Set both of the CD players to single play mode. Play Disc 1, Disc 2 will immediately begin to play when the track ends on disk 1. Disc 1 will return to cue mode and will begin to play at the end of disc 2 track. This function will continue until the jacks are disconnected but may be overriden at any time through manual operation. BOP EFFECT: A Bop Effect is a stutter, creating a sound similar to a CD skipping. The Bop Effect can be created in 3 ways. (1) By Rapidly Pressing the CUE BUTTON (9) a. While in play mode, rapidly press the CUE BUTTON (9) in sync with the music (figure 2). (2) By Tapping the DIRECT TRACK ACCESS BUTTONS (1) a. While in play mode, press the IN CUE BUTTON (5a) (see figure 4). Press the MEMORY BUTTON (2) (figure 6) to set a CUE POINT in memory. Press desired DIRECT TRACK ACCESS BUTTONS (1) (see figure 5). Once RECALL LED lights, rapidly press the DIRECT TRACK ACCESS BUTTON (1) previously selected in step c. (figure 5). Press the IN BUTTON (5a) to set a cue point. Press the BOP BUTTON (12), while in play mode to return to the cue point instantly without music interruption. [. . . ] If you keep pressing the PROGRAM BUTTON (19) the LCD DISPLAY (15)will display the tracks that have been programmed. (4) Press the PLAY BUTTON (11) to begin playing programmed tracks. (5) To cancel the program function press and hold PROGRAM BUTTON (19) for more than 2 seconds. BEFORE SWITCHING OFF THE POWER · When you have finished using the CD player, and before switching off the power, be sure that the disc holder has been closed with the OPEN/CLOSE BUTTON (4). · TRAY PROTECTION: If tray is not closed after 60 seconds, it will close automatically and pause. [. . . ]