User manual AMERICAN AUDIO PRO-DJ2S

[. . . ] PRO-DJ2 front load professional single CD player featuring: Seamless Loop, Fader "Q" Start, BOP Effect, Flip Flop and Digital Output © American DJ® AUDIO Los Angeles, CA 90058 USA IMPORTANT SAFETY ITEMS FOR U. S. A. & CANADA MODEL ONLY WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS CD PLAYER TO WATER OR MOISTURE. NOTE: This CD player uses a semiconductor laser. It is recommended for use in a room at the following temperature: 41°F - 95°F / 5°C - 35°C CAUTION TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE CAREFULLY INSERTED TO PREVENT BLADE EXPOSURE. CAUTION: 1. Do not damage or deform; it may cause electric shock or malfunction when used. [. . . ] When the PLAY/PAUSE BUTTON (11) is pressed, playback starts. · To recall cues, if the recall LED is lit you can press the last number button cue stored and create a BOP EFFECT. The last cue that was stored or recalled will flash in the LED screen to let you know It was last cued up. NOTE: When play starts via pause or track skipping or scanning, the CUE POINT will change to the start point automatically. American DJ® AUDIO · PRO-DJ2 INSTRUCTIONS MANUAL · PAGE 8 BASIC OPERATIONS (CONT. ) 8. AUTO CUE · When disk is loaded, the cue point is set to the first source of music. If track is changed before pressing play, the CUE POINT is changed to the new starting point. If you pause during playback this also sets the new CUE POINT. FRAME SEARCH · This is done by first pausing then using the jog wheel to set the starting point. (When you use the jog wheel the monitor function allows you to hear what is playing. Once you have set starting point press PLAY then CUE to again mute output. ) 10. SCANNING (FAST FORWARD / FAST REVERSE) · To do this rotate Shuttle wheel forward or reverse. You can scan or reverse in 6 different speeds depending on how much you rotate the wheel. SEAMLESS LOOP PLAY · You can create a seamless loop between two points continuously. (1) Press PLAY/PAUSE BUTTON (11) so a CD is playing. The PLAY/PAUSE BUTTON (11) LED lights (figure 10). This sets the starting point of the SEAMLESS LOOP. The IN BUTTON LED will light (figure 11). (3) Press OUT BUTTON (5b) to set desired ending point of the SEAMLESS LOOP. You will know you are in SEAMLESS LOOP mode because IN BUTTON (5a) and OUT BUTTON (5b) LEDs will light and flash. LOOP INDICATOR (31) in LCD DISPLAY (15) will also flash (see figure 14). Sound will continue with no interruption (SEAMLESS LOOP). (4) To exit the SEAMLESS LOOP, press the OUT BUTTON (5b). [. . . ] 4 lines CD, tape etc. ; or 2 lines CD, tape etc. (24) REC OUT - Connect to your record unit. The REC OUT level is not influenced by the master control (17). (25) MASTER OUT - Parallel output of P. A. [. . . ]