User manual AMERICAN AUDIO Q-2422SX

[. . . ] USER INSTRUCTIONS Q-2422/SX Professional Preamp Mixer Q-2422/SX Featuring Fader "Q" Start Main Features · 2 phono, 4 line, 2 auxiliaries & 2 mic inputs · Fader "Q" On/Off switch · RCA and Balanced XLR Outputs · High quality Alps Feather FaderTM for smooth, clean cross fading · Bass, mid & treble control for mics · Volume control for each mic · Fader "Q" Start* (fader allows auto return to preset digital cue points) · On/Off Channel assign switch · Cue mixing slider · Split Cue monitoring · Zone/Booth volume · Treble, Mid, and Bass control per a channel · High level headphone output· On/Off/Talkover switch for DJ mic · Soft-touch rubber knobs and fader handles for better control· Pan and Gain for each channel · 12V BNC light connector for gooseneck light · Left & right turntable ground connectors conveniently located on rear panel · Master volume control · Master Level Indicators with peak hold · Left/Right master balance· Cue Level Control · Cue button with LED for each channel · Neutrik combo microphone connection 1/4"(6. 3mm)/XLR · Independent light control output for touch panels and chase controllers - 1/4" connection · Convenient "L"-Shape design allows you to mount other units directly against the mixer The Q-2422/SX comes with a 2 year limited warranty!* Compatible with American DJ CD Players also featuring Fader "Q" Start © American DJ® AUDIO Los Angeles, CA 90058 USA Specifications subject to change without notice. ©American DJ Audio® - www. americandj. com - Q-2422/SXTM User Instructions page 2 Quick Start Instructions: American DJ would like to thank for your purchase of this great product. For those of you that are to impatiant to read the entire user manual we have compiled these quick start instructions. We hope that you will at least read through these instructions to familirize yourself with the basic understanding of the unit. [. . . ] You can only control the turntables signal after you have switched the PHONO /AUX SELECTOR SWITCH (36) on the rear panel to PHONO, plus you must change the PHONO/AUX/LINE SWITCH (5) on the front panel to PHONO/AUX. The signal is then controlled via the CH-1 AND CH-2 FADERS (6). · Connect your tape player, tuner, sound effects, CD player, and cassette decks etc. to the LEFT & RIGHT RCA LINE SIGNALS (34, 35, & 37) on the rear panel. The signal is then controlled via the CH-1, CH-2 AND CH-3 FADERS (6) when the PHONO/AUX/LINE SWITCH on the front panel (5) is switched to LINE . may also be connected to the LEFT & RIGHT RCA PHONO/AUX JACKS (35 & 37) on the rear of the unit. You can only control this signal after you have switched the PHONO / AUX SELECTOR SWITCH (36) on the rear panel to AUX, plus you must change the PHONO/AUX/LINE SWITCH (5) on the front panel to PHONO/AUX. The signal is then controlled via the CH-1 AND CH-2 FADERS (6). ©American DJ Audio® - www. americandj. com - Q-2422/SXTM User Instructions page 5 Front Panel 15 5 4 3 2 21 20 24 16 1 22 19 10 18 6 17 8 7 9 13 11 12 14 23 (1) POWER SWITCH - Red LED will light when power is ON. (2) MASTER LEVEL - Dual LED's show the level of the left and right master output. (3) CHANNEL GAIN CONTROL - Used to set the level of the output signal for its designated channel. (4) CHANNEL BASS/MID/TREBLE CONTROL - Used to increase or decrease the LOW's, MID's, and HI's of the output signal. The Q-2422/SX features "Rotary Kills" with -35dB to +15dB output control. (5) PHONO/AUX/LINE SWITCH - Used to select the input to be sent to the individual channel. Channels 1 and 2 may be switched PHONO/AUX or LINE. Channel 3 may be switched LINE 3 or LINE 4. The selectors for AUX1/PHONO1 and AUX2/PHONO2 are on the rear panel (36). (6) CHANNEL FADER - Used to adjust the output level of each channel. (7) CUE BUTTONS - Engage the CUE button to monitor the assigned channel. (8) FEATHER FADERTM CROSSFADER - Mixes the signals of the assigned channels. To assign channels use the ASSIGN SWITCH (17) located on either side of the crossfader. When the crossfader is set in the center position, both assigned channels can be heard at once. (9) ON/OFF "Q" START- Start and stop the CD Player with the slide of the fader. [. . . ] PHONO/AUX lines can be used with LINES 1 and 2. The PHONO /AUX SELECTOR SWITCH gives the DJ the possibilities of 2 extra input lines. (37) CHANNEL 1 INPUT JACKS - Connect CD players, tape decks, DAT machines, and all other non-magnetic equipment to the line level inputs. Line level musical instruments with stereo outputs such as Rhythm Machines or Samplers should also be connected to LINE inputs. [. . . ]