Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ANSMANN AES 2. We hope that this ANSMANN AES 2 user guide will be useful to you.
Lastmanuals help download the user guide ANSMANN AES 2.
Detailed instructions for use are in the User's Guide.
[. . . ] Your ANSMANN Team SAFEtY inStRuCtiOnS > Please read the operating instructions carefully and observe the safety instructions!> Do not use the IR energy saving mains socket if there are any signs of damage to the housing, mains pins or cable. > In order to avoid the risk of fire and/or electric shock, the IR mains socket must be protected against high humidity, water and excessive heat! [. . . ] Switch position "IR-timer + Standby": In addition to the above mentioned standby- power cut-off, there is an automatic countdown timer activated, which disconnects all operating devices attached if the remote control has not been detected within one hour. Any IR-signal from the remote control will restart the timer again. Power cut-off will be indicated 60 seconds before the timer runs off by flashing of the LED [E]. Within this time you may prevent cut-off by pushing any button of the remote control. Plug the IR mains socket into a correctly fitting mains socket and connect your device with the IR mains socket. You may also connect several devices by plugging in a multi-way socket to the IR mains socket, but please take care that the maximum load is not exceeded!After this your IR mains socket will be ready. Press any key on your remote control (preferably the key with which you turn on your device) and hold for 2 seconds. The red LED [E] next to the sensor will light up for a short period and the connected device is ready for use. If your device is still in standby mode, turn it on as usual to use it. Any IR signal from your remote control will be indicated by the red LED [E]. As soon as the IR mains socket has disconnected devices from mains, it cuts-off itself completely and will use power no longer thanks to the intelligent Zero Watt Technology (0 Watt). The socket back-up power while disconnected from mains is provided by a battery pack built into the socket. At first time operation the mains cut-off will be after the internal battery is fully charged. eniViROnMEntAl nOtES This IR mains socket contains a lithium battery pack. Do not dispose this product into the normal household waste. [. . . ] Technical details are subject to change without prior notice. DiSClAiMER Information contained in this operating instruction may be changed without any prior notice. ANSMANN cannot accept liability for direct, indirect, accidental or other claims or consequential damages originated by using the information given in this operating instruction or from use of this product. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ANSMANN AES 2
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ANSMANN AES 2 will begin.
