User manual ANSMANN POWERLINE 5

[. . . ] We hope you are happy with your new charger. Your ANSMANN Team saFetY instruCtions > Please read the operating instructions carefully before using the charger!> Do not use the device if there are signs of any damage to the housing or cable. Danger of explosion if other types of batteries are inserted! [. . . ] > A display of battery status per charging slot can be seen on the LCD (only for round cells) and by LED indication > Microprocessor controlled charging and monitoring of the round cell charging status > Trickle charging of the 9V battery. Will switch off after safety timer finishes if no other cells are still charging. > Individual supervision of each battery > Automatic charging current adjustment for all round cells > Multiple over charging protection systems and trickle charging for round cells > Faulty cell detection / accidental Alkaline insertion detection > Reverse polarity protection > World wide use (100-240V AC) oPeration Connect the charger to the mains power (100-240V AC / 50 - 60Hz). Charging of round cells: 1 - 4 NiMH or NiCd rechargeable batteries of the sizes Micro (AAA), Mignon (AA), Baby (C) or Mono (D) can be charged. To insert round cells move the contact bridge backwards and put in the rechargeable battery at the bottom of the charging slot. Always connect the cells in the right direction for polarity according to the symbols in the charging slot. Press the START button for about 2 seconds to start the charging process. The charge status of each cell will be indicated on the LCD panel and the respective LED above each charging slot (see DISPLAY OF THE CHARGING STATUS FOR ROUND CELLS). The cells do not have to be inserted simultaneously as the charging processes are independent from each other. It is normal that cells become warm during charging. After charging is complete, the charger switches automatically to trickle charge. The trickle charge for all inserted cells will automatically switch off after one hour from when the last cell was fully charged (provided no 9V battery is still being charged). The charger automatically disconnects itself from the mains power by means of the intelligent Zero Watt Technology. It does not consume any electric power even if it remains in the power socket. Charging of 9V battery: One 9V Block (E) can be charged when no Mono (D) batteries are inserted to the left or right of the 9V charging slot. Battery in the correct direction for polarity according to the symbols in the charging slot. The charging indicator (LED) above the 9V charging slot lights red when the battery is inserted correctly and the START button has been pressed for about 2 seconds. After the timer for the 9V battery has timed-out, there will be an automatic mains cut off using Zero Watt Technology (if no round cells are inserted and still charging). [. . . ] ANSMANN cannot accept liability for direct, indirect, accidental or other claims or consequential damages originated by not using this device as indicated by these operating instructions. WarrantY notiCe We hereby offer a 3 year warranty on this charger. This does not apply to damages caused by low-quality batteries leaking inside the charger or non-observance of the operating instruction or physical damage due to lack of proper care. Technical details subject to change without prior notice. [. . . ]