User manual AOC 2216SW

[. . . ] These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: A NOTE indicates important information that helps you make better use of your computer system. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may be unaccompanied by an icon. [. . . ] Do not overload power strips and extension cords. Overloading can result in fire or electric shock. Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a fire or electric shock. Do not attempt to service the monitor yourself; opening or removing covers can expose you to dangerous voltages and other hazards. Please refer all servicing to qualified service personnel. To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100 - 240V AC, Min. The wall socket shall be installed near the equipment and shall be easily accessible. For use only with the attached power adapter (Output 12Vdc) which have UL, CSA listed license(Only for monitors with power adapter). Setup the stand and base Please setup or remove the base following below steps. Adjusting Viewing Angle For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's angle to your own preference. Hold the stand so you do not topple the monitor when you change the monitor's angle. You are able to adjust the monitor's angle from -5°to 20°. NOTE: Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen. Attaching the Cables Cable Connections On Back of Monitor and Computer 1. Power 2. Analog Turn off your computer before performing the procedure below. Connect the power cable to the AC port on the back of the monitor. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer's D-Sub port. Turn on your monitor and computer. If your monitor displays an image, installation is complete. If it does not display an image, see Troubleshooting. Attaching Wall Mounting Arm Preparing to Install An Optional Wall Mounting Arm ¡¡ This monitor can be attached to a wall mounting arm you purchase separately. Follow the manufacturer's instructions to assemble the wall mounting arm. Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the back of the monitor. Insert the 4 screws into the holes and tighten. Refer to the user's manual that came with the optional wall mounting arm for instructions on attaching it to the wall. Noted : VESA mounting screw holes are not available for all models, please check with the dealer or official department of AOC. Setting the Optimal Resolution The recommended resolution for this monitor is 1680 by 1050. To setup the monitor to this resolution, follow the steps below. [. . . ] Red Gain from Digital-register Yellow Gain from Digital-register Cyan Gain from Digital-register Magenta Gain from Digital-register Disable or Enable Full Enhance Mode Disable or Enable Nature Skin Mode Disable or Enable Green Field Mode Disable or Enable Sky-blue Mode Disable or Enable AutoDetect Mode Disable or Enable Demo User User-B User-G User-R User-Y User-C User-M on or off on or off on or off on or off on or off on or off Color Boost Full Enhance Nature Skin Green Field Sky-blue AutoDetect Demo Picture Boost Frame Size Brightness Contrast Hue Saturation Position Bright Frame OSD Setup H. Position V. Position Timeout Language Extra Auto Config Reset EXIT/DDC-CI Information 0-14 0-100 0-100 0-100 0-100 H. position V. position on or off 0-100 0-100 0-100 Adjust Frame Size Adjust Frame Brightness Adjust Frame Contrast Adjust Frame Hue Adjust Frame Saturation Adjust Frame horizontal Position Adjust Frame vertical Position Disable or Enable Bright Frame Adjust the verticalposition of OSD Adjust the horizontal position of OSD Adjust the OSD Timeout Select the OSD language Auto adjust the picture to default Reset the menu to default Turn ON/OFF DDC-CI Support Show the information of the main image and subimage source yes or no yes or no LED Indicators Status Full Power Mode Active-off Mode LED Color Green Orange Specifications LCD Panel Resolution Physical Characteristics Environmental Model number 2216Sw Driving system TFT Color LCD Viewable Image Size 548mm diagonal Pixel pitch 0. 277mm(H) x 0. 277mm(V) Video R, G, B Analog lnterface Separate Sync. H/V TTL Display Color 16. 7 million Colors Dot Clock 165 MHz Horizontal scan range 30 kHz - 80 KHz Horizontal scan 464. 94mm Size(Maximum) Vertical scan range 55 Hz - 75 Hz Vertical scan 290. 58mm Size(Maximum) Optimal preset 1680 x 1050 (60 Hz) resolution Highest preset 1680 x 1050 (60 Hz) resolution Plug & Play VESA DDC2B/CI Input Connector D-Sub 15pin Input Video Signal Analog: 0. 7Vp-p(standard), 75 OHM, Positive Power Source 100~240VAC, 47~63Hz Active < 49W Power Consumption Standby < 2W Connector Type 15-pin Mini D-Sub Dimensions & Weight: Height (with base) 398. 6(404. 6) mm Width 505. 8 mm Depth 80. 7 mm Weight (monitor only) 5 kg Weight (with 7 kg packaging) Temperature: Operating 0° to 50° Non-Operating -20°to 60° Humidity: Operating 10% to 85% (non-condensing) Non-Operating 5% to 80% (non-condensing) Altitude: Operating 0~ 3000m (0~ 10000 ft ) Non-Operating 0~ 5000m (0~ 15000 ft ) EPA Energy STAR ® ENERGY STAR® is a U. S. As an ENERGY STAR® Partner, AOC International (Europe) GmbH has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Preset Display Modes HORIZONTAL STAND Dos-mode RESOLUTION 720 x 400 FREQUENCY(kHZ) 31. 469 VERTICAL FREQUENCY(Hz) 70. 0 VGA VGA VGA SVGA SVGA SVGA SVGA XGA XGA XGA WXGA+ WXGA+ WSXGA WSXGA Pin Assignments 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1440 x 900 1440 x 900 1680 x 1050 1680 x 1050 31. 469 37. 861 37. 500 35. 156 37. 879 48. 077 46. 875 48. 363 56. 476 60. 023 55. 935 55. 469 65. 290 64. 670 60. 0 72. 0 75. 0 56. 0 60. 0 72. 0 75. 0 60. 0 70. 0 75. 0 60. 0 60. 0 60. 0 60. 0 Pin Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 15-Pin Side of the Signal Cable Video-Red Video-Green Video-Blue N. C. [. . . ]