User manual AOC JC240AJ61ED

[. . . ] Explanation of WARNING Symbols Dangerous Voltage: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence dangerous voltage within the inside of the product that may be sufficient level to constitute a risk of electric shock to persons. Instruction: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. Safety instructions 1) 2) 3) 4) 5) 6) 7) 8) Read these instructions. Do not use liquid, alcohol, or aerosol cleaners. Install your LCD TV in a well-ventilated area. [. . . ] When in ATV mode, the displayed items may be different. Note: The favorite channel icon will not be displayed in the channel banner. Channel List Press the LIST button and the Channel List will be displayed. Press OK key on the channel you wish to watch, and you can be directed to that channel immediately. 15 Favorite List Press FAVORITE key to display the favorite channels you've added to the FAVORITE LIST. You can use or to select a favorite channel, and then press OK to direct to that channel immediately. To set up favorite channels, select the Program Edit function in CHANNEL menu. Electronic Program Guide (EPG) Press the GUIDE button to display the Electronic Program Guide. Press the or button to scroll up or down the channels, or to change time period. To change date, press the Yellow key first, and then select date with or . You can also pause at a channel and press the INFO key to view the detailed program information, or press OK to switch to that program directly. You can also add a reminder on a program by pressing the Blue button. When the reminder event is about to start, a window will appear to remind you for watching. To check the programs you've added by Reminder, press the Green key to display the SCHEDULE LIST. To delete a Reminder, select with or and press the Red key. Press the EXIT button to exit Electronic Program Guide. 16 Using the OSD Menu You are able to use OSD menus to adjust various settings by using your remote control or menu button on the bottom of the LCD TV. The basic operation is as following: · Press MENU to display OSD menu. · Press to enter the OSD menu page. · Use to select the optional item you want to adjust. · Press to adjust levels or select the items. · If the item is marked with , press to display the sub-menu or enable the function. · Press MENU again to exit current OSD page. · Use RED/GREEN/YELLOW/BLUE button to perform special functions. 17 ADVANCED OPERATION--OSD MENU You can use the OSD menu to adjust various settings for your LCD TV. Press the MENU button to display the OSD Menu, and use to select the desired OSD menu. Picture Menu --To adjust the picture quality In ATV, DTV, AV, S-Video, SCART, YPbPr, HDMI source: Note: The LOCK and CHANNEL menu icons are only enabled in ATV and DTV source. 18 Note: The LOCK and CHANNEL menu icons are only enabled in ATV and DTV source. In VGA source: 19 Picture Mode: To select picture mode between Standard, Mild, User, and Dynamic. When user is selected, you can adjust the level of Contrast, Brightness, Colour, Tint, and Sharpness separately. Brightness: To adjust luminance of video. [. . . ] Have it checked by a service technician. Put your LCD TV only in a clean dry environment. Unplug the LCD TV immediately if it gets wet, and consult your service technician. Always unplug the LCD TV before cleaning it. [. . . ]