User manual AOPEN AOR401

[. . . ] 4-Port 10/100Mbps Ethernet Broadband Router AOR-401 User's Guide AOpen America 1911 Lundy Ave. San Jose, CA 95131 http://www. aopen. com AOpen Inc. 83, Ko Wang Road, Gau Yuan Tsun, Lung Tan Hsiang, Tao-Yuan Hsien 325, Taiwan, R. O. C. http://www. aopen com. tw 1907SHIS1045830 OpenLinkTM To Communication Internet BroadBand Router 1 WAN + 4 LAN User Guide FCC Warning This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] While the LAN is link up to the computer system, the LAN port's Link/ACT LED will light up. 10 PC NETWORK TCP/IP SETTING The network TCP/IP settings differ based on the computer's operating system (Win95/98/ME/NT/2000) and are as follows. Windows 95/98/ME 1. Click on the "Network neighborhood" icon found on the desktop. Click the right mouse button and a context menu will be show. Select "Properties" to enter the TCP/IP setting screen. Select "Obtain an IP address automatically" on the "IP address" field. 11 5. Select "Disable DNS" in the "DNS" field. 6. Select "None" for the "Gateway address" field. 12 Windows 2000 Double click on the "My computer" icon on the desktop. When "My computer" window opens, open the "Control panel" and then open the "Network dialup connection" applet. Double click on the "Local area network connection" icon. Select "Properties" to enter the TCP/IP setting window. In the "Local area network status" window, click on "Properties. " 2. In the "Local area network connection" window, first select TCP/IP setting and then select "Properties. " 3. Set both "IP address" and "DNS" to Automatic configuration. 13 Windows NT4. 0 Click on the "Start" button located on the lower left corner of the menu bar. Select "Settings" and then "Control panel. " In the "Control panel" window, select "Network" to enter the TCP/IP setting window. Set "IP address" to "Obtain an IP address automatically. " 2. Set "DNS" to "Disable DNS. " 14 INTERNET BROADBAND ROUTER CONFIGURATION First make sure that the network connections are functioning normally. This Internet Broadband Router can be configured using Internet Explorer 4. 0 or newer web browser versions. Login to the Internet Broadband Router Before you configure this device, note that when the Broadband Router is configured through an Ethernet connection, make sure the host PC must be set on the IP subnetwork that can be accessed by the xDSL/Cable modem. For example, when the default network address of the xDSL/Cable modem Ethernet interface is 192. 168. 1. x, then the host PC should be set at 192. 168. 1. xxx (where xxx is a number between 2 and 254), and the default subnet mask is 255. 255. 255. 0. Open Internet Explorer 4. 0 or above Internet browser. Click on the Connect-on-demand button to dial up to the ISP when only on demand, while there is a need of connecting to the ISP automatically. 18 1-2-4 PPTP If connected to the Internet using a (PPTP) xDSL Modem, enter the PPTP Account Name, PPTP Password, Host Name, Service IP Address, Your IP Address, Your Subnet Mask required by your ISP in the appropriate fields. If your ISP has provided you with a Connection ID, enter it in the Connection ID field, otherwise, leave it zero. The MTU feature specifies the largest packet size permitted for network transmission. Enter the value desired, for most DSL users, it is recommended to use 1460. By default, MTU is set at 1460 The Maximum Idle Time feature can control the connection time while user's need to save the cost of connection fee from ISP provider (default time=0, always connect). [. . . ] When users send this type of request to your network via the Internet, the Router will forward those requests to the appropriate PC. If you need to run applications that require multiple connections, specify the port normally associated with an application in the "Trigger Port" field, select the protocol type as TCP or UDP, then 28 enter the public ports associated with the trigger port to open them for inbound traffic. TCP (Transmission Control Protocol) - A method (protocol) used along with the Internet Protocol (Internet Protocol) to send data in the form of message units between computers over the Internet. While IP takes care of handling the actual delivery of the data, TCP takes care of keeping track of the individual units of data (called packets) that a message is divided into for efficient routing through the Internet. [. . . ]